In the present work, a new and efficient sorbent has been prepared using the co-precipitation method for magnetic dispersive solid phase extraction followed by dispersive liquid-liquid microextraction. This method was used for the extraction and preconcentration of some widely-used pesticides (chlorpyrifos, haloxyfop--methyl, oxadiazon, diniconazole, clodinafop-propargyl, fenpropathrin, and fenoxaprop--ethyl) from fruit juices prior to their determination by gas chromatography-flame ionization detection. The sorbent was prepared by octadecylamine co-precipitation with FeO. In the first step, mg amount of the magnetic sorbent was spread into an aqueous sample solution including the selected analytes and vortexed. Then the analytes were eluted with acetonitrile from the surface of the nanoparticles separated with an external magnetic field from the aqueous solution. In the second step, the obtained eluent was mixed with an extraction solvent (chloroform) at the μL-level and rapidly injected into deionized water. After centrifugation, an aliquot of the sedimented phase was injected into the separation system. Experimental parameters which control the performance of both steps were investigated and optimized. Using optimum extraction conditions, the proposed method provided low limits of detection (0.23-0.41 μg L) and quantification (0.81-1.3 μg L), high enrichment factors (353-443), acceptable extraction recoveries (70-88%), and satisfactory relative standard deviations (≤6%) for intra- ( = 6) and inter-day ( = 4) precisions at a concentration of 30 μg L of each pesticide.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/d2ay00404f | DOI Listing |
Langmuir
January 2025
Department of Physical Chemistry and Materials Science, Budapest University of Technology and Economics, Műegyetem rkp. 3, 1111 Budapest, Hungary.
During the experimental formation of sol-gel coatings, the colloid dispersions go through a drying process, and the structure of the coatings is formed as a result of complex chemical, colloidal, and capillary interactions. While computer simulations provide guidelines to tune and even design the nanomaterials synthesis, simulations of coating structure formation are hitherto unknown in the literature. Based on real experiments, we establish here a ReaxFF reactive force field-based molecular dynamics simulation protocol in order to investigate and determine the role of the experimental conditions on the pore structure formation in the coatings.
View Article and Find Full Text PDFLangmuir
January 2025
State Key Laboratory of Digital Medical Engineering, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, People's Republic of China.
The protein carrier and encapsulation system based on polyelectrolytes plays crucial roles in drug research and development. Traditional methods such as isothermal titration calorimetry and molecular dynamics simulation have illuminated parts of this complex relationship. However, they fall short of capturing the full picture of the interaction during the carrier's fabrication and protein loading dynamics.
View Article and Find Full Text PDFInt J Biol Macromol
December 2024
Qingdao Sunefire Science & Technology Shares Co., Ltd, Qingdao 266423, China.
Polymers are promising as stabilizers for developing eco-friendly foam extinguishing agents to solve the imminent pollution problem of fluorinated ones. Present work aims to elucidate the mechanisms by which polymers influence the performance of non-fluorinated foams. Specifically, it investigates the effects of three polymers-xanthan gum (XG), sodium carboxymethyl cellulose (CMCNa), and gelatin (GEL) on surface tension, conductivity, viscosity, foamability, foam stability, and rheology of the siloxane-based Gemini/sodium alpha-alkenyl sulfonate mixture.
View Article and Find Full Text PDFMacromolecules
December 2024
Dainton Building, Department of Chemistry, University of Sheffield, Brook Hill, Sheffield, South Yorkshire S3 7HF, U.K.
We report the reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) in -dodecane using a poly(lauryl methacrylate) (PLMA) precursor at 90 °C. This formulation is an example of polymerization-induced self-assembly (PISA), which leads to the formation of a colloidal dispersion of spherical PLMA-PHEMA nanoparticles at 10-20% w/w solids. PISA syntheses involving polar monomers in non-polar media have been previously reported but this particular system offers some unexpected and interesting challenges in terms of both synthesis and characterization.
View Article and Find Full Text PDFACS Omega
December 2024
Heterogeneous Catalysis Group, Department of Chemistry, Progressive Education Society's, Modern College of Arts, Science and Commerce (Autonomous) Shivajinagar, Pune 5, Maharashtra 411005, India.
The selective deprotection of substituted aryl esters like acetates and propionates in the presence of different electron-donating and -withdrawing functional groups to the corresponding phenols in good yields was reported using the Lewis acid supported solid acid catalyst 20 InCl/MCM-41 prepared by the wet impregnation method. The textural and microscopic properties of the catalyst were studied, which revealed a high degree of dispersion of InCl over MCM-41, promising quantification of Lewis acidity, and well-ordered honeycomb structure. The methodology was further explored for the selective deprotection of acetates and propionates in the presence of substituted amides that remain unaltered.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!