Anaerobic digestion is an increasingly widespread process for organic waste treatment and renewable energy production due to the methane content of the biogas. This biological process also produces a digestate (i.e., the remaining content of the waste after treatment) with a high fertilizing potential. The digestate composition is highly variable due to the various organic wastes used as feedstock, the different plant configurations, and the post-treatment processes used. In order to optimize digestate spreading on agricultural soils by optimizing the fertilizer dose and, thus, reducing environmental impacts associated to digestate application, the agronomic characterization of digestate is essential. This study investigates the use of near infrared spectroscopy for predicting the most important agronomic parameters from freeze-dried digestates. A data set of 193 digestates was created to calibrate partial least squares regression models predicting organic matter, total organic carbon, organic nitrogen, phosphorus, and potassium contents. The calibration range of the models were between 249.8 and 878.6 gOM.kgDM, 171.9 and 499.5 gC.kgDM, 5.3 and 74.1 gN.kgDM, 2.7 and 44.9 gP.kgDM and between 0.5 and 171.8 gK.kgDM, respectively. The calibrated models reliably predicted organic matter, total organic carbon, and phosphorus contents for the whole diversity of digestates with root mean square errors of prediction of 70.51 gOM.kgDM, 34.84 gC.kgDM and 4.08 gP.kgDM, respectively. On the other hand, the model prediction of the organic nitrogen content had a root mean square error of 7.55 gN.kgDM and was considered as acceptable. Lastly, the results did not demonstrate the feasibility of predicting the potassium content in digestates with near infrared spectroscopy. These results show that near infrared spectroscopy is a very promising analytical method for the characterization of the fertilizing value of digestates, which could provide large benefits in terms of analysis time and cost.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jenvman.2022.115393 | DOI Listing |
Sci Rep
January 2025
Geology Department, Faculty of Science, Assiut University, Assiut, Egypt.
Limestone mining waste and its derived CaO were checked as an adsorbents of pb, Cu, and Cd ions from water solution. The characterization of Limestone and calcined limestone was studied by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), Scanning Electron Microscope (SEM), and Surface area measurements (BET). The optimum conditions of sorbent dosage, pH, initial concentration, and contact time factors were investigated for pristine limestone and calcined limestone absorbents.
View Article and Find Full Text PDFTransl Psychiatry
January 2025
Department of Biomedical Engineering, National University of Singapore, Singapore, Singapore.
Environ Pollut
January 2025
College of Land Resources and Environment, Jiangxi Agricultural University, Nanchang, 330045, P.R. China.
Propyrisulfuron, a novel sulfonylurea herbicide, effectively suppresses intracellular acetolactate synthase activity for weed control, but its adsorption behavior in the soil environment remains unclear. To assess potential agroecosystem risks, the adsorption-desorption behavior and mechanism of propyrisulfuron in six typical agricultural soils of China were investigated using a batch equilibrium method, Density Functional Theory (DFT), Fourier Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscopy equipped with Energy Dispersive X-ray (SEM-EDX) techniques. It is indicated that the adsorption-desorption of propyrisulfuron in six soils reached equilibrium at 36 hours under the optimum water-to-soil ratio (WSr) of 5:1.
View Article and Find Full Text PDFInt J Pharm
January 2025
Department of Pharmacy, Faculty of Health and Medical Sciences, University of Copenhagen 2100 Copenhagen, Denmark. Electronic address:
Additively manufactured drug products, typically produced using small-scale, on-demand batch mode, require rapid and non-destructive quantification methods. A tunable modular design (TMD) approach combining porous polymeric freeze-dried modules and an additive manufacturing method, inkjet printing, was proposed in an earlier study to fabricate accurate and patient-tailored doses of an antidepressant citalopram hydrobromide. This approach addresses the unmet medical needs associated with antidepressant tapering.
View Article and Find Full Text PDFWater Res
January 2025
China Electronics System Engineering No.2 Construction Co., Ltd., Wuxi 214115, PR China.
Copper-containing industrial wastewater, characterized by strong acidity, high ionic strength, and various competing metals, presents significant challenges for Cu(II) recovery. To address these issues, an electric field-enhanced ultrafiltration process was developed, assisted with a functional polyelectrolyte with high selectivity for Cu(II). The polyelectrolyte, termed PPEI, was synthesized by grafting picolyl groups onto polyethyleneimine (PEI), enhancing its affinity for Cu(II).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!