Silica aerogel composite is an excellent thermal insulator for spacecraft under high-temperature and complex air environments. This study intends to evaluate SiC-doped silica aerogel’s thermal insulation performance under large temperature and air pressure differences. In this paper, the hot surface’s temperature response of SiC-doped silica aerogel with different content was studied at significant temperature differences (ΔT) when pressure changes instantaneously. Their thermal insulation performance was evaluated by analyzing the influence of pressure gradients on the unsteady-state heat transfer. When the cold surface’s temperature of the specimen keeps constant at 15 °C and ΔT = 171~912 K, the results demonstrate that the correlative thermal conductivities of silica aerogel with 1% and 5.84% SiC are 0.02223~0.04077 W·m−1·K−1 at P ≈ 10 Pa and 0.03165~0.04665 W·m−1·K−1 at P = 1 atm, respectively. The aerogel composite with 0% SiC showed the best thermal insulation performance at ΔT < 200 K and P ≈ 10 Pa, while the aerogel with 5.84% SiC became the best at ΔT > 700 K and P = 1 atm. In addition, the transient pressure decreases will significantly impair the heat transfer of the gas inside the aerogel, thereby weakening the gaseous thermal conductivity and improving the thermal insulation performance.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9141499 | PMC |
http://dx.doi.org/10.3390/gels8050320 | DOI Listing |
Int J Biol Macromol
January 2025
School of Chemistry and Materials Science, Hubei Engineering University, Xiaogan 43200, China.
Passive Radiant Cooling and Heating are green and sustainable methods of radiant heat management without consuming additional energy. However, the absorption of sunlight and poor insulation of materials can reduce radiative cooling and also affect radiative heating performance. Herein, we have constructed porous hierarchical dual-mode silk nanofibrous aerogel (SNF) films with high mechanical toughness and stability using silk nanofibers/GO.
View Article and Find Full Text PDFJ Environ Manage
January 2025
Department of Fashion Technology, PSG College of Technology, Coimbatore, 641004, India.
Domestic laundry wastewater is a major contributor to microfiber emissions in the aquatic environment. Among several mitigation measures, the use of external filters to capture microfibers from wastewater is one of the most efficient and commercially viable methods. This study attempted to develop an eco-friendly filtration medium to filter microfibers in laundry wastewater using luffa cylindrica fibers.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Research Laboratory for Sustainable Development and Health, Department of Applied Physics, Faculty of Sciences and Technics, Cadi Ayyad University, Marrakesh 40000, Morocco.
Considering the growing need for developing ecological materials, this study investigates the acoustic, mechanical, and thermal properties of wood composites reinforced with beech or oak wood fibres. Scanning electron microscopy (SEM) revealed a complex network of interconnected pores within the composite materials, with varying pore sizes contributing to the material's overall properties. Acoustic characterization was conducted using a two-microphone impedance tube.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Korea Packaging Center, Korea Institute of Industrial Technology, Bucheon 14449, Republic of Korea.
Starch foam has attracted significant attention as an alternative to expanded styrene (EPS) foam owing to its abundance and biodegradability. Despite these merits, its limited thermal insulation and flexibility compared to EPS have hindered its utilization in packaging. Herein, we report the effect of blending with starch/PBAT on foaming behavior and physical properties during foaming processing.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Department of Civil Engineering and Management, Faculty of Civil Engineering, Technical University of Cluj-Napoca, 28 Memorandumului Str., 400114 Cluj-Napoca, Romania.
The objective of this paper is to analyze the characteristics of twelve compositions based on hemp shiv and four traditional binders used in the construction industry: cement, plaster, hydrated lime and clay, with the aim of using the resulting materials as final finishing products applicable to the raw area of walls, slabs and other construction elements for walls. Comparative, cost and multi-criteria analyses were carried out on the proposed compositions. The comparative analysis focused on acoustic, thermal, mechanical and fire characteristics, followed by a cost analysis and ending with multi-criteria analysis.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!