Fracture or cracking essentially involves the formation of new interfaces. These patterns are usually studied as two-dimensional mosaics. The new surface that opens up is in the third dimension, along the thickness of the sample. The thickness is usually very small compared to the lateral dimensions of the pattern. A spectacular and distinctive departure from these everyday examples of cracks are columnar joints. Here, molten volcanic lava, by the sea, cools and cracks under appropriate thermal and elastic conditions, causing the crack system to grow downward, creating long, vertical columns with polygonal cross-section. The focus of this paper is the study of the elongated interfaces of these columns: how the cross-section of their outlines gradually undergoes a metamorphosis from a disordered-looking Gilbert tessellation to a well-ordered hexagonal Voronoi pattern. As the columns grow downward to lengths of several meters (in natural systems), their outline continuously changes, the center may shift, causing the column to twist. For the first time, the evolution of these crack mosaics has been simulated and mapped as a trajectory of a 4-vector tuple in a geometry-topology domain. The trajectory of the columnar joint systems is found to depend on the crack seed distribution and crack orientation. An empirical relationship between the system energy and the crack mosaic shape parameter λ has been proposed on the basis of principles of fracture mechanics. The total system energy shows a power-law dependence on λ with the exponent β ∼ 0.3 and λ ≈ 0.75 at crack maturation. The parameter values are validated by matching the proposed relation with energy estimates existing in the literature. The relation not only matches the visible changes in geometry but also provides a feasible measure of the energy of the system. The geometric energy for the polygonal mosaics in the transverse section has also been estimated as a function of time. The geometric energy moves toward a minimum as the mosaic becomes more Voronoi-like at maturation.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acs.langmuir.2c00746DOI Listing

Publication Analysis

Top Keywords

columnar joints
8
grow downward
8
system energy
8
geometric energy
8
crack
7
energy
6
evolution tiling-like
4
tiling-like crack
4
crack patterns
4
patterns maturing
4

Similar Publications

Article Synopsis
  • The study focused on dissimilar laser welding of AISI 1060 carbon steel and Duplex Stainless Steel 2205, using both experimental and numerical methods to analyze the impact of welding parameters.
  • The increase in laser power significantly influenced the melt pool depth, which rose from 0.4 mm to 1.4 mm when power was ramped up from 250 to 450 W, and the resultant microstructure varied between the two materials with distinct solidification patterns.
  • Tensile test results indicated that the carbon steel side exhibited brittle fracture, while the Duplex Stainless Steel showed a ductile fracture, highlighting the differing mechanical properties due to their respective microstructures and the transition towards ductility with increased laser energy density.
View Article and Find Full Text PDF

Study on uniaxial compression mechanical properties of 3D printed columnar joint test blocks.

Sci Rep

December 2024

College of Civil Engineering and Transportation, Hohai University, Nanjing, 210098, China.

The columnar joint skeleton of 3D printed Acrylonitrile Butadiene Styrene (ABS) material, the skeleton of cement mortar and ultraviolet aging treatment are combined to pour the columnar joint rock mass (CJRM) test block. The strength, deformation, energy and failure modes of the specimens with different dip angles were analyzed by uniaxial compression test. The influence of joint skeleton on the strength of the test block was analyzed.

View Article and Find Full Text PDF

Aggregation-Induced Emission-Active Cyanostilbene-Based Liquid Crystals: Self-Assembly, Photophysical Property, and Multiresponsive Behavior.

Molecules

December 2024

Suzhou Key Laboratory of Macromolecular Design and Precision Synthesis, Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application, State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, China.

Cyanostilbene (CS)-related conjugated groups can be considered as dual functional groups of AIEgen and mesogen to construct photoluminescent liquid crystals, and it is essential to study the relationship between their molecular structures and compound properties systematically. In this paper, we designed and synthesized linear and bent-shaped CS derivatives containing ester- and amide-connecting groups and different substituted numbers of alkoxy tails. Their phase behaviors and photophysical properties were investigated in depth.

View Article and Find Full Text PDF

Unlabelled: A hatching-distance-controlled lattice of 65.1Co28.2Cr5.

View Article and Find Full Text PDF

Effects of Postweld Heat Treatment on Interfacial Behavior and Mechanical Properties of Joints Welded with Cu/Ni-Cr Alloy.

Materials (Basel)

November 2024

State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China.

Welded cable composed of nickel-chromium (Ni-Cr) alloy and copper is a crucial component in the resistance heating technology used for heavy oil production. Tungsten inert gas (TIG) welding was employed to join the copper and Ni-Cr alloy using copper filler wire, and the stability of the welded joint was analyzed under high-temperature service conditions. We examined the changes in the microstructure and properties of the welded joint after postweld heat treatment (PWHT) at 600 °C for 3, 6, and 12 days.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!