Wastewater treatment plant effluent and microfiber pollution: focus on industry-specific wastewater.

The production, use, and disposal of synthetic textiles potentially release a significant amount of microfibers into the environment. Studies performed on municipal wastewater treatment plants (WWTPs) effluent reported a higher presence of microfibers due to the mix of domestic laundry effluent through sewage. As municipal WWTPs receive influents from households and industries, it serves as a sink for the microfibers. However, research on textile industry WWTPs that primarily treat the textile fabric processing wastewater was not explored with the concern of microfibers. Hence, the review aims to analyze the existing literature and enlighten the impact of WWTPs on microplastic emission into the environment by specifically addressing textile industry WWTPs. The results of the review confirmed that even after 95-99% removal, municipal WWTPs can emit around 160 million microplastics per day into the environment. Microfiber was the dominant shape identified by the review. The average microfiber contamination in the WWTP sludge was estimated as 200 microfibers per gram of sludge. As far as the industry-specific effluents are analyzed, textile wet processing industries effluents contained > 1000 times higher microfibers than municipal WWTP. Despite few existing studies on textile industry effluent, the review demonstrates that, so far, no studies were performed on the sludge obtained from WWTPs that handle textile industry effluents alone. Review results pointed out that more attention should be needed to the textile wastewater research which is addressing the textile wet processing industry WWTPs. Moreover, the sludge released from these WWTPs should be considered as an important source of microfiber as they contain more quantity of microfibers than the effluent, and also, their routes to the environment are huge and easy.