Perovskite solar cells (PSCs) have demonstrated enormous potential for next-generation low-cost photovoltaics. However, due to the intrinsically low bond energy of the perovskite lattice, the long-term stability is normally undermined by ion migration initiated by the electric field and atmospheric conditions. Therefore, ideal ion migration inhibition is important to achieve an enhanced stability of PSCs. Herein, we first introduce a chemical vapor deposition (CVD) fabricated highly crystalline graphene as an atomic 2D blanket directly for the perovskite absorber of PSCs. Iodine and lithium ion migration is effectively inhibited for perovskite solar cells under a continuous static electric field. The water and oxygen corrosion of the unencapsulated device has been dramatically mitigated with atomic graphene blanketing on the perovskite film. With triphenylamine (TPA) molecule modification, the photoconversion efficiencies (PCEs) of the blanketed devices reach 21.54%. The sample with blanket graphene maintains 85% of the initial efficiency, in comparison to 52% of the control sample under voltage bias. After 600 h of aging at 25 °C and 55 RH%, 86% in comparison to <30% of the PCE for the control device is obtained for the sample with a graphene blanket. Thus, we propose that crystalline graphene has an excellent and effective ion-blocking blanket potential for highly stable perovskite devices.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.2c02347 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Crystal-Facet Engineering of Mesoporous CuS Cascade Nanoreactors Enhances Photocatalytic C-C Coupling of CO2-to-C2H4.
Angew Chem Int Ed Engl
January 2025
Inner Mongolia University, Daxue West Road, 010021, Hohhot, CHINA.
Crystal-facet heterojunction engineering of mesoporous nanoreactors with highly redox-active represents an efficacious strategy for the transformation of CO2 into valuable C2 products (e.g., C2H4).
View Article and Find Full Text PDFUnraveling 3d Transition Metal (Ni, Co, Mn, Fe, Cr, V) Ions Migration in Layered Oxide Cathodes: A Pathway to Superior Li-Ion and Na-Ion Battery Cathodes.
Adv Mater
January 2025
Institute of Science and Technology for New Energy, Xi'an Technological University, Xi'an, P. R. China.
Li-ion and Na-ion batteries are promising systems for powering electric vehicles and grid storage. Layered 3d transition metal oxides ATMO (A = Li, Na; TM = 3d transition metals; 0 < x ≤ 2) have drawn extensive attention as cathode materials due to their exceptional energy densities. However, they suffer from several technical challenges caused by crystal structure degradation associated with TM ions migration, such as poor cycling stability, inferior rate capability, significant voltage hysteresis, and serious voltage decay.
View Article and Find Full Text PDFEngineering vanadium vacancies to accelerate ion kinetics for high performance zinc ion battery.
J Colloid Interface Sci
January 2025
State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun 130012, PR China. Electronic address:
Vanadium dioxide (VO) has attracted significant attention in aqueous zinc ion batteries (AZIBs) owing to their desirable theoretical specific capacity originated from multiple electrons transfer reaction and special crystal structure. However, sluggish electrochemical kinetics leads to inferior electrochemical storage performance. Herein, rich vanadium vacancies were introduced in tunnel VO to boost Zn diffusion, increasing charge storage capacity and lengthen lifespan.
View Article and Find Full Text PDFFire-retardant and thermally conductive polyacrylonitrile-based separators enabling the safety of lithium-ion batteries.
J Colloid Interface Sci
December 2024
College of Emergency Management, Nanjing Tech University, Nanjing 211816, China.
Lithium-ion batteries (LIBs) have broad application prospects in many fields because of their high energy density. However, the poor heat resistance of polyolefin membranes and uneven lithium deposition result in battery failure and even infamous thermal runaway behavior. To improve the intrinsic safety of batteries, fire-retardant, thermally conductive, electrospinning strategies are employed to acquire a functional polyacrylonitrile (PAN) nanofiber separator (PAN@FBN/TPP) containing modified boron nitride (FBN) and triphenyl phosphate (TPP).
View Article and Find Full Text PDFMultifunctional Organic Molecule for Defect Passivation of Perovskite for High-Performance Indoor Solar Cells.
Materials (Basel)
January 2025
Key Laboratory of Applied Surface and Colloid Chemistry, National Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Laboratory for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an 710119, China.
Perovskite solar cells (PSCs) can utilize the residual photons from indoor light and continuously supplement the energy supply for low-power electron devices, thereby showing the great potential for sustainable energy ecosystems. However, the solution-processed perovskites suffer from serious defect stacking within crystal lattices, compromising the low-light efficiency and operational stability. In this study, we designed a multifunctional organometallic salt named sodium sulfanilate (4-ABS), containing both electron-donating amine and sulfonic acid groups to effectively passivate the positively-charged defects, like under-coordinated Pb ions and iodine vacancies.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!