Coal is affected by the concentrated stress disturbance of mining, the disturbance of drilling hole formation, and the concentrated stress of coal shrinkage and splitting of gas desorption from the hole wall; these result in a large number of secondary cracks that collect and leak gas. As a result, it is difficult for the coal seam sealing process to meet engineering quality sealing requirements, which results in problems such as low gas concentration during the extraction process. In this paper, based on the analysis of coal pore and fissure characteristics, and in view of the current situation of gas drainage and sealing in this coal seam, combined with the existing grouting and sealing technology, it is proposed to use pressure grouting and sealing to realize the sealing of deep coal bodies in the hole wall. According to the field conditions, the experimental pressure sealing parameter index is as follows: theoretical sealing length = 9.69 m, the sealing length = 13.98 m is verified, and the final sealing length is determined to be 15 m; the sealing radius is determined to be 0.6 m; the cement slurry was prepared on site with a water: cement ratio of 2:1; = 0.43 MPa was calculated; the range of the slurry diffusion radius was 93.4-176.6 cm; the grouting pressure was determined to be 0.516 MPa. Field application practice has proved that: (1) Under the same drilling parameters and sealing parameters, the gas drainage effect of drilling with pressure sealing is 2.3 times higher than that without pressure sealing; (2) Using traditional sealing technology for drilling holes, the gas extraction concentration is far lower than the sealing operation effect of using the pressure sealing process; (3) Reasonably extending the length of the gas extraction drilling and sealing is a basic guarantee for realizing a substantial increase in the gas extraction concentration; (4) Sealing with pressure leads to a reliable and stable hole process.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9104883PMC
http://dx.doi.org/10.3390/ijerph19094968DOI Listing

Publication Analysis

Top Keywords

sealing
20
pressure sealing
20
gas extraction
16
sealing technology
12
coal seam
12
sealing length
12
gas
9
pressure
8
concentrated stress
8
hole wall
8

Similar Publications

Objectives: Multiple studies have described the onset and variable incidence of postoperative acute vertigo following cochlear implant (CI) surgery. However, postoperative imaging has not yet been specifically evaluated with special focus on vertigo. The aim of this study is to assess the incidence and causes of new-onset, acute postoperative vertigo following CI surgery using cone beam computed tomography (CBCT).

View Article and Find Full Text PDF

The NASA Mars 2020 Perseverance Rover Mission has collected samples of rock, regolith, and atmosphere within the Noachian-aged Jezero Crater, once the site of a delta-lake system with a high potential for habitability and biosignature preservation. Between sols 109 and 1,088 of the mission, 27 sample tubes have been sealed, including witness tubes. Each sealed sample tube has been collected along with detailed documentation provided by the Perseverance instrument payload, preserving geological and environmental context.

View Article and Find Full Text PDF

Background And Objectives: Deep brain stimulation (DBS) is a well-established intervention for alleviating both motor and nonmotor symptoms of Parkinson disease. However, a common complication of stereotaxic DBS surgery is pneumocephalus, which can compromise electrode accuracy, complicate postoperative assessments, and negatively affect the long-term outcomes of DBS surgery. This report proposes a comprehensive and robust set of recommendations aimed at optimizing DBS surgical protocols to achieve zero pneumocephalus outcomes.

View Article and Find Full Text PDF

Objective: Chemicals used during canal disinfection and endodontic sealers have a deleterious effect on dentin bond strength. The aim of this study was to evaluate a novel clinical sequence to improve the resin-dentin microtensile bond strength (μTBS) to endodontically treated teeth.

Materials And Methods: Twenty human molars were distributed in four experimental groups (n = 5, N = 20): C-control group without exposure to any endodontic chemical substances (2.

View Article and Find Full Text PDF
Article Synopsis
  • Diabetic foot ulcers (DFUs) can lead to severe complications like amputation if not treated promptly, often due to delays in care.
  • A 56-year-old patient experienced a DFU linked to a bacterial infection from poultry exposure, requiring multiple debridement surgeries and targeted antibiotic treatment.
  • Effective management of DFUs involves adjusting antibiotic therapies based on identified pathogens to reduce mortality and prevent irreversible amputations.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!