We report an exceptionally high-efficiency synthesis of long single-wall carbon nanotube (SWCNT) forests using porous substrates (metal meshes) in place of nonporous flat substrates. This study examined the dependence of the growth efficiency on various mesh structures, including wire diameter, aperture size, and total surface area. We demonstrated that the synthesis of SWCNT forests is highly dependent on the initial porosity as well as maintaining the open pores throughout the duration of the growth. Our results show that carbon nanotubes (CNTs) can be grown on all surfaces of the mesh in high efficiency with the optimum growth efficiency observed for a mesh porosity of ∼30%. Based on these results, we demonstrated the high efficiency synthesis of SWCNT forests (height: >3.47 mm, average growth rate: 301 μm min, and yield: 12.7 mg cm in 10 min growth time). Furthermore, we showed that the initial growth rates exceeded 1 millimeter per minute (1000 μm min). Our results further indicate that metal meshes represent a viable alternative to nonporous flat substrates for the efficient synthesis of tall and high yielding SWCNTs.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9078519PMC
http://dx.doi.org/10.1039/c7ra13093gDOI Listing

Publication Analysis

Top Keywords

swcnt forests
12
millimeter minute
8
growth rates
8
carbon nanotube
8
metal meshes
8
nonporous flat
8
flat substrates
8
growth efficiency
8
synthesis swcnt
8
high efficiency
8

Similar Publications

Interfacial Charge Transfer in One-Dimensional AgBr Encapsulated inside Single-Walled Carbon Nanotube Heterostructures.

ACS Nano

November 2024

Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Division of Advanced Materials, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou 215123, China.

Article Synopsis
  • - The study focuses on one-dimensional van der Waals heterostructure (1D vdWH) nanomaterials, which enhance the development of electronic and optical devices by facilitating electron transfer in host-guest interactions.
  • - Researchers successfully synthesized AgBr nanowires contained within single-walled carbon nanotubes (SWCNTs) to delve into the mechanisms of electron transfer, employing cyclic voltammetry (CV) to analyze interactions between the materials.
  • - Findings revealed a significant reduction in surface potential and confirmed charge transfer through CV and theoretical calculations, underscoring the method's effectiveness in studying electron dynamics within 1D vdWHs.
View Article and Find Full Text PDF

Developing devices with a wide-temperature range persistent photoconductivity (PPC) and ultra-low power consumption remains a significant challenge for optical synaptic devices used in neuromorphic computing. By harnessing the PPC properties in materials, it can achieve optical storage and neuromorphic computing, surpassing the von Neuman architecture-based systems. However, previous research implemented PPC required additional gate voltages and low temperatures, which need additional energy consumption and PPC cannot be achieved across a wide temperature range.

View Article and Find Full Text PDF

Atomically Engineered Encapsulation of SnS Nanoribbons by Single-Walled Carbon Nanotubes for High-Efficiency Lithium Storage.

Nano Lett

June 2024

Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Division of Advanced Materials, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou 215123, China.

Rechargeable lithium-ion batteries are integral to contemporary energy storage, yet current anode material systems struggle to meet the increasing demand for extended range capabilities. This work introduces a novel composite anode material composed of one-dimensional 2H-phase tin disulfide (SnS) nanoribbons enclosed within cavities of single-walled carbon nanotubes (SnS@SWCNTs), achieved through precise atomic engineering. Employing aberration-corrected transmission electron microscopy, we precisely elucidated the crystal structure of SnS within the confines of the SWCNTs.

View Article and Find Full Text PDF

Synthetic trade-offs exist in the synthesis of single-walled carbon nanotube (SWCNT) forests, as growing certain desired properties can often come at the expense of other desirable characteristics such as the case of crystallinity and growth efficiency. Simultaneously achieving mutually exclusive properties in the growth of SWCNT forests is a significant accomplishment, as it requires overcoming these trade-offs and balancing competing mechanisms. To address this, we trained a machine-learning regression model with a set of 585 "real" experimental synthesis data, which were taken using an automatic synthesis reactor.

View Article and Find Full Text PDF

Growth and Performance of High-Quality SWCNT Forests on Inconel Foils as Lithium-Ion Battery Anodes.

ACS Appl Mater Interfaces

December 2022

Physical and Life Sciences, Lawrence Livermore National Laboratory, Livermore, California94550, United States.

Large-scale production of vertically aligned single-walled carbon nanotubes (VA-SWCNTs) on metal foils promises to enable technological advancements in many fields, from functional composites to energy storage to thermal interfaces. In this work, we demonstrate growth of high-quality (G/D > 6, average diameters ∼ 2-3 nm, densities > 10 cm) VA-SWCNTs on Inconel metal for use as a lithium-ion battery (LIB) anode. Scale-up of SWCNT growth on Inconel 625 to 100 cm exhibits nearly invariant CNT structural properties, even when synthesis is performed near atmospheric pressure, and this robustness is attributed to a growth kinetic regime dominated by the carbon precursor diffusion in the bulk gas mixture.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!