In this study, strontium ferrite (SF)-incorporated zeolite imidazole framework (ZIF-8) (SFZIF-8) that can simultaneously uptake Pb(II) and tetracycline (TC) in solution was synthesized and characterized. The physicochemical properties of the as-prepared SFZIF-8 were characterized by various functional groups, higher average pore diameter (3.414 nm), and stronger negative charge (-30.5 mV). Adsorption kinetics, isotherms, effect of various water conditions including solution pH and temperature, and reusability were studied to evaluate its adsorption performance. The adsorption capacity of SFZIF-8 was compared with that of commonly used adsorbents (powder and granular activated carbon). SFZIF-8 showed much higher adsorption performance (429.6 mg/g and 433.4 mg/g for Pb(II) and TC, respectively) than powder activated carbon (129.9 mg/g and 142.0 mg/g for Pb(II) and TC, respectively) and granular activated carbon (249.3 mg/g and 263.0 mg/g for Pb(II) and TC, respectively) in Pb(II) and TC binary solutions. The SFZIF-8 adsorption behaviors for the removal of Pb(II) and TC were explained by the pseudo-first-order and Langmuir models from the adsorption kinetics and isotherm experiments, respectively. The regenerated SFZIF-8 exhibited a competitive performance even after the third cycle. These results indicate that Pb(II) and TC can be removed with SFZIF-8 via electrostatic attraction, surface complexation, hydrogen bonding, and π-π interactions. Therefore, by exhibiting effective and efficient adsorption performance, SFZIF-8 nanocomposites can be utilized as alternative and promising adsorbents for the simultaneous removal of both Pb(II) and TC.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.envres.2022.113419DOI Listing

Publication Analysis

Top Keywords

removal pbii
12
adsorption performance
12
activated carbon
12
pbii
9
zeolite imidazole
8
imidazole framework
8
framework zif-8
8
simultaneous removal
8
pbii tetracycline
8
sfzif-8
8

Similar Publications

Industrial wastewater containing heavy metal ions presents serious economic risk to the environment. In this study, a novel compound of aminated cellulose with jeffamine EDR148 was prepared to improve cellulose's adsorptive behavior towards metal ions. This study undertook a straightforward and efficient cellulose modification through homogeneous chlorination in N,N'-butylmethylimidazolium chloride to produce 6-deoxychlorocellulose (Cell-Cl), followed by a reaction with jeffamine EDR148 and ultimately resulting in the formation of aminated cellulose (Cell-Jef148).

View Article and Find Full Text PDF

Nano-Fibrillated Bacterial Cellulose Nanofiber Surface Modification with EDTA for the Effective Removal of Heavy Metal Ions in Aqueous Solutions.

Materials (Basel)

January 2025

Division of Applied Chemistry and Biochemistry, National Institute of Technology, Tomakomai College, Nishikioka 443, Tomakomai 059-1275, Hokkaido, Japan.

Nano-fibrillated bacterial cellulose (NFBC) has very long fibers (>17 μm) with diameters of approximately 20 nm. Hence, they have a very high aspect ratio and surface area. The high specific surface area of NFBC can potentially be utilized as an adsorbent.

View Article and Find Full Text PDF

High-Performance TiCT-MXene/Mycelium Hybrid Membrane for Efficient Lead Remediation: Design and Mechanistic Insights.

ACS Appl Mater Interfaces

January 2025

Department of Materials Design and Innovation, University at Buffalo, Buffalo, New York 14260-1660, United States.

This study presents a hybrid microfiltration technology designed for high-performance lead (Pb(II)) remediation, especially from aqueous solutions with high Pb(II) concentrations, by utilizing two-dimensional (2D) TiCT-MXene layers deposited on dry mycelium membranes. The hybrid TiCT-MXene/mycelium (MyMX) membranes were fabricated via a single-step electrochemical deposition (ECD) technique, which enabled a uniform coating of 2D TiCT-MXene onto individual hyphal fibers of a prefabricated mycelium membrane. Optimized ECD parameters for high Pb(II) uptake were identified using scanning electron microscopy and energy-dispersive X-ray spectroscopy.

View Article and Find Full Text PDF

Application of supervised learning models for enhanced lead (II) removal from wastewater via modified cellulose nanocrystals (CNCs).

J Environ Sci Health A Tox Hazard Subst Environ Eng

January 2025

Department of Environmental Science, College of Agriculture and Environmental Sciences, University of South Africa, Florida, South Africa.

Heavy metal ions are acknowledged to impact the environment and human health adversely. CNCs are effective materials for removing heavy metal ions in industrial applications and process innovations since they can be used in static and dynamic adsorption processes. Cost-effective, uncomplicated water treatment technologies must be developed using biodegradable polymers, namely, modified cellulose nanocrystals.

View Article and Find Full Text PDF

Light-driven in-situ synthesis of nano-sulfur and graphene oxide composites for efficient removal of heavy metal ions.

J Hazard Mater

January 2025

State Key Lab of Geohazard prevention & Geoenvironment protection, College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu 610059, China. Electronic address:

Sulfur nanoparticles (SNPs) and their composites are promising for heavy metal adsorption, yet current SNPs often lack surface S, leading to low affinity toward heavy metal and ease of aggregation. Here, we report a simple light-driven method for facile prepare SNPs with surfaces enriched with S and in-situ load them onto graphene oxide (GO) to fabricate GO-S composites. Under illumination, the O generated by photosensitizer phloxine B was able to oxidize S into elemental SNPs.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!