To deal with fossil fuel depletion and the rise in global temperatures caused by fossil fuels, cheap and abundant materials are required, in order to fulfill energy demand by developing high-performance fuel cells and electrocatalysts. In this work, a natural organic agent has been used to synthesize nano-structured ZnO/MnO with high surface area and enhanced electrocatalytic performance. Upon pre-annealing treatment, mixed metal oxide precipitates are formed due to the complex formation between a metal oxide and organic extract. The thermally annealed mixed oxide ZnO/MnO was characterized by XRD diffractometer, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). Gas chromatography-mass spectrometry (GC-MS) identified methyldecylamine as a major stabilizing agent of the synthesized nanomaterial. Using a Tauc plot, the calculated band energy for the synthesized ZnO/MnO mixed metal oxide was 1.65 eV. Moreover, we have demonstrated the effects of incorporated organic compounds on the surface chemistry, morphology and electrochemical behavior of ZnO/MnO. The phyto-functionalized ZnO/MnO was deposited on Ni-foam for electrocatalytic studies. The fabricated electrode revealed good performance with low over-potential and Tafel slope, suggesting it to be suitable as a potential catalyst for water splitting application, in particular for the oxygen evolution reaction (OER). The overall findings of the current study provide a cost-effective and efficient organic template for functionalization and sustainable fabrication of ZnO/MnO nanomaterial for application as an electrocatalyst.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9050345PMC
http://dx.doi.org/10.1039/c9ra10472kDOI Listing

Publication Analysis

Top Keywords

metal oxide
12
mixed metal
8
electron microscopy
8
zno/mno
6
organic
5
organic template-based
4
template-based zno
4
zno embedded
4
embedded mno
4
mno nanoparticles
4

Similar Publications

Cadmium is a heavy metal contaminant known to cause various health issues. However, limited research exists on the serum metabolomic effects of cadmium exposure in children. In this study, we recruited 42 children to analyze their serum metabolomic profiles, along with measuring urinary cadmium and creatinine concentrations, to evaluate the impact of environmental cadmium exposure on serum metabolism.

View Article and Find Full Text PDF

Technology-critical elements (TCEs), essential in emerging technologies, are increasingly finding their way into our environment, raising concerns about their sparsely studied behavior and toxicity. To contribute insights into the toxicological aspects, we employed bioassays to investigate the possible cytotoxic effects in four representative cell lines (AR-EcoScreen GR-KO-M1, DR-EcoScreen, MCF7AREc32, VM7Luc4E2) and the potential to induce oxidative stress via the nuclear factor erythroid 2-related factor 2 (Nrf2) pathway for a number of these elements. Nine TCEs, three rare-earth elements (REEs: Gd, Nd, Yb) and six less-studied TCEs (LSTCEs: Ga, Ge, In, Ta, Te, Tl), were selected for this study, along with three well-studied traditional metal contaminants (TMCs: As, Cd, Pb) for comparison.

View Article and Find Full Text PDF

Aluminium is a common metallic toxicant that easily penetrates the brain and exerts severe pathological effects e.g., oxidative stress, inflammation and neurodegeneration.

View Article and Find Full Text PDF

Halide perovskites have attracted recent attention as thermoelectric materials due to their low thermal conductivity combined with good charge transport characteristics. The tin halide perovskites hold the highest within metal halide perovskites and offer lower toxicity than lead-containing perovskites that are well-known for photovoltaics. In this study, we partially substitute Sn (II) with Ge (II) to form mixed metal CsSnGeI perovskite thin films that have substantially improved stability, remaining in the black orthorhombic phase after hours of ambient air exposure.

View Article and Find Full Text PDF

Supercycle Al-Doped ZnMgO Alloys via Atomic Layer Deposition for Quantum Dot Light-Emitting Diodes.

ACS Appl Mater Interfaces

January 2025

Department of Photonics and Nanoelectronics, and BK21 FOUR ERICA-ACE Center, Hanyang University, Ansan 15588, Korea.

Colloidal quantum-dot light-emitting diodes (QD-LEDs) have been significantly improved in terms of device performance and lifetime by employing zinc oxide (ZnO) as an electron transport layer (ETL). Although atomic layer deposition (ALD) allows fabrication of uniform, high-quality ZnO films with minimal defects, the high conductivity of ZnO has hindered its straightforward application as an ETL in QD-LEDs. Herein, we propose fabrication of Al-doped ZnMgO (Al:ZnMgO) ETLs for QD-LEDs through a supercycle ALD, with alternating depositions of various metal oxides.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!