Silver nanowires (AgNWs) have been considered as a promising candidate for transparent stretchable conductors (TSCs). However, the strong interface mismatch of stiff AgNWs and elastic substrates leads to the stress concentration at their interface and ultimately the low stretchability and poor durability of TSCs. Here, to address the interfacial mismatch of AgNWs-based TSCs we put forward a universal interface tailoring strategy that introduces the mercapto compound as the intermediate cross-linked layer. The mercapto compound strongly interacts with the AgNWs, forming a dense protective layer on their surface to improve their corrosion resistance, and reacts with the polymer substrate, forming a buffer layer to release the concentrated stress. As a result, the optimized TSCs showed superior stretchability (160%), exceptional durability (230 000 cycles), competent optoelectrical performance (18.0 ohm·sq with a transmittance of 86.5%), and prominent stability. This work provides clear guidance and a strong impetus for the development of transparent stretchable electronics.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.nanolett.2c00876 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Super Tough Multifunctional MXene/PAA-CS Double Network Hydrogels with High Mechanical Sensing Properties and Excellent EMI Shielding Performance.
Small
December 2024
School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, 230026, China.
Hydrogels present significant potential in flexible materials designed for electromagnetic interference (EMI) shielding, attributed to their soft, stretchable mechanical properties and water-rich porous structures. Unfortunately, EMI shielding hydrogels commonly suffer from low mechanical properties, deficient fracture energy, and low strength, which limit the serviceability of these materials in complex mechanical environments. In this study, the double network strategy is successfully utilized along with the Hofmeister effect to create MXene/PAA (polyacrylic acid)-CS (chitosan) hydrogels and further strengthen and toughen the gel with (NH)SO solution.
View Article and Find Full Text PDFDevelopment of Highly Stretchable Ag-MWCNT Composite for Screen-Printed Textile Electronics with Improved Mechanical and Electrical Properties.
Nanotechnol Sci Appl
December 2024
Institute of Mechanics and Printing, Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, Warsaw, Poland.
Introduction: The rapid growth of flexible and wearable electronics has created a need for materials that offer both mechanical durability and high conductivity. Textile electronics, which integrate electronic pathways into fabrics, are pivotal in this field but face challenges in maintaining stable electrical performance under mechanical strain. This study develops highly stretchable silver multi-walled carbon nanotube (Ag-MWCNT) composites, tailored for screen printing and heat-transfer methods, to address these challenges.
View Article and Find Full Text PDFTough and Functional Hydrogel Coating by Electrostatic Spraying.
Small
December 2024
Center for X-Mechanics, Department of Engineering Mechanics, Zhejiang University, Hangzhou, 310027, China.
Hydrogel coatings impart superior surface properties to materials, but their application on large and complicated substrates is hindered by two challenges: limited wetting conditions and intricate curing processes. To overcome the challenges, lyophilized adhesive hydrogel powders (LAHPs) are developed, which consist of poly(acrylic acid-co-3-(trimethoxysilyl)propyl methacrylate) crosslinked with chitosan. These powders are electrostatic sprayed onto substrates to address wetting issues and rehydrated to form bulk hydrogel coatings to circumvent curing challenges.
View Article and Find Full Text PDFWireless wearable multifunctional sensor based on carboxylated cellulose nanofibers/silver nanowires for ultra-sensitive, fast humidity response and body temperature monitoring.
Int J Biol Macromol
December 2024
Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, School of Chemistry and Chemical Engineering, Guangxi University, No. 100, Daxuedong Road, Xixiangtang District, Nanning 530004, China. Electronic address:
Humidity and temperature sensors are considered as hotspots for the next generation of wearable multifunctional electronics. However, it is still a notable challenge to realize multifunctional sensors with high-performance humidity response, excellent mechanical properties, and accurate temperature monitoring capability. In this work, a hydrogen-bond cross-linked hybrid network was constructed between carboxystyrene-butadiene rubber (XSBR) and hydrophilic carboxylated cellulose nanofibers (CNF) noncovalently modified silver nanowires (AgNWs).
View Article and Find Full Text PDFA functional eutectogel based on ultrahigh-molecular weight polymers: Physical entanglements in deep eutectic solvent.
J Colloid Interface Sci
December 2024
Department of Chemical and Materials Engineering, National Central University, Taoyuan 32001, Taiwan. Electronic address:
Eutectogels have emerged as a promising material for wearable devices due to its superior ionic conductivity, non-volatility, and low cost. Despite numerous efforts, only a limited number of polymers and gelling mechanisms have been successfully employed in the fabrication of eutectogels. In this study, an effective three-dimensional network is developed based on the entanglements of polymer chains, facilitating the formation of an entangled eutectogel.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!