A physical model is demonstrated to optimize narrow-linewidth distributed feedback lasers based on apodized laterally coupled gratings (AG-DFB). The structure can effectively suppress the longitudinal spatial hole burning as well as remove the regrowth process during fabrication by using the apodized grating geometry. The studies include numerical simulations of the AG-DFB laser for its static and dynamic behaviors at different cavity lengths and facet coating conditions. The results show that the proposed device can achieve narrow linewidth, high slope efficiency, and broad modulation bandwidth, as compared to /4 phase-shifted DFB lasers.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/AO.453285 | DOI Listing |
This study proposes and experimentally demonstrates a distributed feedback (DFB) laser with a distributed phase shift (DPS) region at the center of the DFB cavity. By modeling the field intensity distribution in the cavity and the output spectrum, the DPS region length and phase shift values have been optimized. Experimental comparisons with lasers using traditional π-phase shifts confirm that DFB lasers with optimized DPS lengths and larger phase shifts (up to 15π) achieve stable single longitudinal mode operation over a broader current range, with lower threshold current, higher power slope efficiency, and a higher side mode suppression ratio (SMSR).
View Article and Find Full Text PDFJ Phys Chem Lett
December 2024
Combustion Research Facility, Sandia National Laboratories, Livermore, California 94550, United States.
We demonstrate the capability of a narrow linewidth quantum cascade laser (QCL) to selectively excite a very narrow velocity range of nitric oxide (σ ≤ 7(3) m/s) with a pure ro-vibrational quantum state. By implementing a counter-propagating geometry, the molecules are selectively excited according to the Doppler shift of the ro-vibrational transition frequency such that the velocity width associated with the excited molecules depends only on the QCL linewidth. We demonstrate a velocity distribution limited by the effective linewidth of our free-running QCL (Γ = 3.
View Article and Find Full Text PDFWe propose and demonstrate the inscription of ultra-short distributed Bragg reflector fiber lasers (DBR-FLs) in Er/Yb co-doped fiber (EYDF) using a femtosecond laser plane-by-plane (Pl-b-Pl) method. By integrating the spherical aberration (SA) with a laser 2D scanning process, a planar refractive index modification (RIM) region can be induced in the fiber core. Thanks to the Pl-b-Pl inscription, a high-quality fiber Bragg grating (FBG) in an EYDF is produced, exhibiting a grating strength exceeding 40 dB and an insertion loss of 0.
View Article and Find Full Text PDFAn optical pumping scheme is proposed for reducing the gradient of electron spin polarization and suppressing light source noise in a spin-exchange relaxation-free magnetometer. This is achieved by modulating only the phase of a narrow-linewidth pump light field with external Gaussian noise. Compared to the absence of phase modulation, the uniformity of electron spin polarization was improved by over 40%, and the light-frequency noise suppression ratio of the magnetometer was enhanced by 4.
View Article and Find Full Text PDFSci Rep
November 2024
Department of Electrical and Computer Engineering, University of California Santa Barbara, Santa Barbara, CA, 93106, USA.
Today's precision experiments for timekeeping, inertial sensing, and fundamental science place strict requirements on the spectral distribution of laser frequency noise. Rubidium-based experiments utilize table-top 780 nm laser systems for high-performance clocks, gravity sensors, and quantum gates. Wafer-scale integration of these lasers is critical for enabling systems-on-chip.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!