In recent years, detoxification of contaminated water by different types of materials has received a great deal of attention. However, lack of methodical in-depth understanding of the role of various physical properties of such materials toward improved sorption performance limits their applicable efficiencies. In perspective, decontamination of oxoanion-polluted water by porous materials with different morphologies are unexplored due to a shortfall of proper synthetic strategies. Herein, systematic optimization of sequestration performance toward efficient decontamination of toxic oxoanion-polluted water has been demonstrated by varying the morphologies of an imidazolium-based cationic polymeric network [ionic porous organic polymers (iPOP-5)]. Detailed morphological evolution showed that the chemically stable ionic polymer exhibited several morphologies such as spherical, nanotube, and flakes. Among them, the flakelike material [iPOP-5(F)] showed ultrafast capture efficiency (up to ∼99 and >85% removal within less than 1 min) with high saturation capacities (301 and 610 mg g) toward chromate [Cr(VI)] and perrhenate [Re(VII)] oxoanions, respectively, in water. On the other hand, the spherical-shaped polymer [iPOP-5(S)] exhibited relatively slow removal kinetics (>5 min for complete removal) toward both Cr(VI) and Re(VII) oxoanions. Notably, iPOP-5(F) eliminated Cr(VI) and Re(VII) selectively even in the presence of excessive (∼100-fold) competing anions from both high- and low-concentration contaminated water. Further, the compound demonstrated efficient separation of those oxoanions in a wide pH range as well as in various water systems (such as potable, lake, river, sea, and tannery water) with superior regeneration ability. Moreover, as a proof of concept, a column exchange-based water treatment experiment by iPOP-5(F) has been performed to reduce the concentration of Cr(VI) and Re(VII) below the WHO permitted level. Mechanistic investigation suggested that the rare in situ exfoliation of flakes into thin nanosheets helps to achieve ultrafast capture efficiency. In addition, detailed theoretical binding energy calculations were executed in order to understand such rapid, selective binding of chromate and perrhenate oxoanions with iPOP-5(F) over other nonmetal-based anions.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.2c02174 | DOI Listing |
ACS Appl Mater Interfaces
May 2022
Department of Chemistry, Indian Institute of Science Education and Research (IISER) Pune, Dr. Homi Bhaba Road, Pashan, Pune 411008, India.
In recent years, detoxification of contaminated water by different types of materials has received a great deal of attention. However, lack of methodical in-depth understanding of the role of various physical properties of such materials toward improved sorption performance limits their applicable efficiencies. In perspective, decontamination of oxoanion-polluted water by porous materials with different morphologies are unexplored due to a shortfall of proper synthetic strategies.
View Article and Find Full Text PDFChemosphere
October 2021
OHSU-PSU School of Public Health, Oregon Health & Science University, 3181 SW Sam Jackson Park Road, Portland, OR, 97239, USA. Electronic address:
Metal(loid) oxyanions in groundwater, surface water, and wastewater can have harmful effects on human or ecological health due to their high toxicity, mobility, and lack of degradation. In recent years, the removal of metal(loid) oxyanions using zerovalent iron (ZVI) has been the subject of many studies, but the full scope of this literature has not been systematically reviewed. The main elements that form metal(loid) oxyanions under environmental conditions are Cr(VI), As(V and III), Sb(V and III), Tc(VII), Re(VII), Mo(VI), V(V), etc.
View Article and Find Full Text PDFPolymers (Basel)
March 2020
Department of Colloid Chemistry, Max Planck Institute of Colloids and Interfaces, 14476 Potsdam-Golm, Germany.
Here, a nanofiber-exfoliated bacteria cellulose aerogel with improved water affinity and high mass transfer was synthesized. Consequently, poly Schiff base can be uniformly coated within the body of bacteria cellulose aerogel without the traditional dispersion treatment. The composite aerogel has adequate mechanical and thermal stability and high mass transfer efficiency.
View Article and Find Full Text PDFEnviron Pollut
July 2020
Department of Environmental Engineering, College of Biology and the Environment, Nanjing Forestry University, 159 Longpan Road, Nanjing, 210037, PR China. Electronic address:
Supported carbon quantum dots (CQDs), used as fluorescent sensors for the detection of metal ions, have rarely been used to remove heavy metals from water. Nitrogen-doped CQDs immobilized in hydrophilic silica hydrogels exhibited a more superior sensitivity and selectivity for the detection of Re(VII) and Cr(VI) than other metal ions, including Fe(III), Fe(II), Zn(II), Cu(II) and Mn(II). For the first time, low limits of detection (LOD) of 2.
View Article and Find Full Text PDFTalanta
June 1974
Department of Chemistry, Kurukshetra University, Kurukshetra 132119, Haryana, India.
A simple and selective extraction of molybdenum is described. Tungsten is masked with tartaric acid and molybdenum(VI) is reduced in 2M hydrochloric acid by boiling with hydrazine sulphate. Iron, copper and vanadium are then masked with ascorbic acid, thiourea and potassium hydrogen fluoride respectively.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!