The present paper investigates the axial and shear buckling analysis of a carbon nanotube (CNT)-reinforced multiscale functionally graded material (FGM) plate. Modified third-order deformation theory (MTSDT) with transverse displacement variation is used. CNT materials are assumed to be uniformly distributed, and ceramic fibers are graded according to a power-law distribution of the volume fraction of the constituents. The effective material properties are obtained using the Halpin-Tsai equation and Voigt rule of the mixture approach. A MATLAB code is developed using nine noded iso-parametric elements containing 13 nodal unknowns at each node. The shear correction factor is eliminated in the present model, and top and bottom transverse shear stresses are imposed null to derive higher-order unknowns. Comparisons of the present results with those available in the literature confirm the accuracy of the existing model. The effects of material components, plate sizes, loading types, and boundary conditions on the critical buckling load are investigated. For the first time, the critical buckling loads of CNT-reinforced multiscale FGM rectangular plates with diverse boundary conditions are given, and they can be used as future references.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8999476 | PMC |
| http://dx.doi.org/10.3390/ma15072401 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fracture properties of porcine versus human thoracic aortas from tricuspid/bicuspid aortic valve patients via symmetry-constraint Compact Tension testing.
Sci Rep
January 2025
Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden.
Aneurysm rupture is a life-threatening event, yet its underlying mechanisms remain largely unclear. This study investigated the fracture properties of the thoracic aneurysmatic aorta (TAA) using the symmetry-constraint Compact Tension (symconCT) test and compared results to native and enzymatic-treated porcine aortas' tests. With age, the aortic stiffness increased, and tissues ruptured at lower fracture energy [Formula: see text].
View Article and Find Full Text PDFDisc degeneration influences the strain magnitude and stress distribution within the adjacent trabecular bone.
Front Bioeng Biotechnol
December 2024
Department of Bioengineering, Imperial College London, London, United Kingdom.
Article Synopsis
- Up to 20% of people may experience osteoporotic vertebral fractures, and current bone mineral density (BMD) measurements present challenges in predicting these fractures.
- The study examined how intervertebral disc (IVD) degeneration affects stress and strain distribution in adjacent vertebrae by using human cadaveric lumbar specimens and advanced imaging techniques.
- Results indicated that trabecular bone near degenerated IVDs experienced significantly higher strains and altered stress distributions compared to non-degenerated IVDs, suggesting that incorporating IVD metrics could enhance fracture risk assessments.
Don't mind the gap: reframing the Perren strain rule for fracture healing using insights from virtual mechanical testing.
Bone Joint Res
January 2025
Department of Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, Pennsylvania, USA.
Aims: The "2 to 10% strain rule" for fracture healing has been widely interpreted to mean that interfragmentary strain greater than 10% predisposes a fracture to nonunion. This interpretation focuses on the gap-closing strain (axial micromotion divided by gap size), ignoring the region around the gap where osteogenesis typically initiates. The aim of this study was to measure gap-closing and 3D interfragmentary strains in plated ovine osteotomies and associate local strain conditions with callus mineralization.
View Article and Find Full Text PDFAnalysis on characteristics and mechanism for rock fracture in deep rock with cracks under dynamic-static coupling effect.
Sci Rep
December 2024
School of Civil Engineering and Architecture, Anhui University of Science and Technology, Huainan, 232001, Anhui, China.
The mechanical behavior and fracture mechanisms of deep fractured rocks under explosive dynamic loads are critical for understanding rock instability in engineering applications such as blasting operations. This study aims to investigate how the presence of pre-existing cracks and different stress states affect the mechanical properties and fracture patterns of rock-like specimens under dynamic loading conditions. We utilized a Split Hopkinson Pressure Bar (SHPB) with an active confining pressure loading device to conduct impact compression tests on rock-like specimens containing pre-existing cracks.
View Article and Find Full Text PDFVariations in humeral and femoral strains across body sizes and limb posture in American alligators.
J Exp Biol
December 2024
Department of Biological Sciences, Clemson University, Clemson, SC 29634, USA.
Bone loading is a crucial factor that constrains locomotor capacities of terrestrial tetrapods. To date, limb bone strains and stresses have been studied across various animals, with a primary emphasis on consistent bone loading in mammals of different sizes and variations in loading regimes across different clades and limb postures. However, the relationships between body size, limb posture and limb bone loading remain unclear in animals with non-parasagittally moving limbs, limiting our understanding of the evolution of limb functions in tetrapods.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!