In this study, the possibility of using ionic liquids (ILs) as auxiliary substances improving the vulcanization and physicochemical properties of natural rubber (NR) biocomposites filled with nanosized silica was investigated. Hence, the influence of ILs with bromide and chloride anions and various cations, i.e., alkylimidazolium, alkylpyrrolidinium and alkylpiperidinium cation, on the curing characteristics and crosslink density of NR compounds was determined. Furthermore, the effect of nanosized silica and ILs on the functional properties of the obtained vulcanizates, including mechanical properties under static and dynamic conditions, hardness, thermal stability and resistance to thermo-oxidative aging, were explored. Applying nanosized silica improved the processing safety of NR compounds but significantly increased the optimal vulcanization time compared to the unfilled rubber. ILs significantly improved the cure characteristics of NR compounds by increasing the rate of vulcanization and the crosslink density of NR biocomposites. Consequently, the tensile strength and hardness of the vulcanizates significantly increased compared to that without ILs. Moreover, the use of nanosized silica and ILs had a favorable impact on the thermal stability of the vulcanizates and their resistance to prolonged thermo-oxidation.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9000785 | PMC |
http://dx.doi.org/10.3390/nano12071209 | DOI Listing |
Nanomaterials (Basel)
January 2025
State Key Laboratory of High-Performance Civil Engineering Materials, Jiangsu Sobute New Materials Co., Ltd., Nanjing 210008, China.
A novel class of SiO aerogel-based resin composite with a self-formed foamy structure and an extremely low thermal conductivity, as well as excellent fire resistance, was fabricated via a room temperature and atmospheric pressure route. The self-formed foamy structure was achieved by utilizing SiO aerogel particles not only as a thermal insulative functional additive filler but also as nano-sized solid particles in a Picking emulsion system, adjusting the surface tension as a stabilizer at the interface between the two immiscible phases (liquid and air in this case). The results of foamy structure analyses via scanning electron microscopy, micro-CT, and N adsorption-desorption isotherms validate the successful generation of a micro-scale porous structure with the enhancement of the aerogel nano-scale solid particles at the wall as a stabilizer.
View Article and Find Full Text PDFInt J Pharm
January 2025
Laboratory of Pharmaceutical Technology, Department of Pharmaceutics, Ghent University, Ottergemsesteenweg 460, B-9000 Ghent, Belgium.
Nowadays, most of the newly developed active pharmaceutical ingredients (APIs) consist of cohesive particles with a mean particle size of <100μm, a wide particle size distribution (PSD) and a tendency to agglomerate, therefore they are difficult to handle in continuous manufacturing (CM) lines. The current paper focuses on the impact of various glidants on the bulk properties of difficult-to-handle APIs. Three challenging powders were included: two extremely cohesive APIs (acetaminophen micronized (APAPμ) and metoprolol tartrate (MPT)) which previously have shown processing issues during different stages of the continuous direct compression (CDC)-line and a spray dried placebo (SD) powder containing hydroxypropylmethyl cellulose (HPMC), known for its sub-optimal flow with a high specific surface area (SSA) and low density.
View Article and Find Full Text PDFInt J Mol Sci
December 2024
Institute of Biomedical Chemistry, Pogodinskaya Str., 10, Moscow 119121, Russia.
Biomacromolecules generally exist and function in aqueous media. Is it possible to estimate the state and properties of molecules in an initial three-dimensional colloidal solution based on the structure properties of biomolecules adsorbed on the two-dimensional surface? Using atomic force microscopy to study nanosized objects requires their immobilization on a surface. Particles undergoing Brownian motion in a solution significantly reduce their velocity near the surface and become completely immobilized upon drying.
View Article and Find Full Text PDFACS Biomater Sci Eng
January 2025
Centre of Science and Society, Institute of Interdisciplinary Sciences (IIDS), University of Allahabad, Prayagraj 211002, India.
Inhalation of silica dust in the workplace has been addressed as a serious occupational pulmonary disease subsequently leading to inflammation and fibrosis. Enhanced expression of IL-10 significantly contributes to the disease etiology, along with an elevated Th2-type paradigm. Previously, we showed that the exaggerated Th2-type response was also associated with consistent upregulation of Stat3 in mouse airways stimulated with silica microparticles.
View Article and Find Full Text PDFSci Rep
November 2024
Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Okólna 2, Wrocław, 50-422, Poland.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!