Influences of charge properties and hydrophobicity on the coagulation of inorganic and organic matters from water associated with starch-based coagulants.

In this work, two series of binary graft cationic starch-based coagulants (CS-DMCs and CS-DMLs) with different hydrophobicities and charge densities (CDs) were prepared by graft copolymerization of acrylamide with 2-(methacryloyloxy)-N,N,N- trimethylethanaminium chloride and acryloyloxyethyl dimethyl benzyl ammonium chloride, respectively, on the starch (St) backbone. Kaolin particles, sodium humate (NaHA), and bovine serum albumin (BSA) were used as the simulated sources of inorganic colloidal particles and different organic pollutants in the micropolluted turbid surface water. The influences of the CD and hydrophobicity associated with the St-based coagulants on the removal of kaolin particles, NaHA, and BSA from single, binary, and ternary pollutant aqueous systems were investigated systematically. On the basis of the apparent coagulation performance, the floc characteristics, and the zeta potentials of the supernatants after coagulation, the coagulation mechanisms associated with the structural features of the St-based coagulants and the pollutants treated were explored and discussed in detail. The St-based coagulants with a higher CD and a stronger hydrophobicity showed better coagulation performance due to the synergistic effects of charge neutralization and hydrophobic association. The maximum efficiencies of the optimized St-based coagulant in removal of Kaolin, NaHA and BSA were 93.85%, 100% and 97.52% in their respective single pollutant systems. In addition to these simulated water samples, a real micropolluted turbid surface water tested and compared, further confirming the superiority of the hydrophobically modified cationic St-based coagulants, especially in the purification of organic pollutants in water.