Current study aims to synthesize chitosan/polyvinyl alcohol (CS/PVA), poly(ethyleneimine), and FeO impregnated beads for co-removal of Cr(VI) and toxic azo-dyes from wastewater. The mesoporous PEI@AC@FeO exhibits magnetism and enhanced physisorption by higher specific-porosity (2.1 nm) from Cr(VI) radii (0.044 nm). Moreover, surface functional groups (-OH, -NH, -NH, -COOH etc.), especially amines enhance ionic bonding due to positive zeta potential. Hence, it is unique for anionic dyes removal under a wide pH range. It showed maximum adsorption capacity 98, 85.5, 85.8, and 91%, or 199.8, 148, 167, 176.5 mg g respectively for Cr(VI), tartrazine, sunset yellow, and erythrosine. Surface adsorption of Cr(VI) and its transition into Cr(III) was confirmed by EDX. Langmuir isotherm and pseudo-first-order kinetics best fit the adsorption of Cr(VI) and azo-dyes confirming their monolayer physisorption on adsorbent surface. Synthesized adsorbent examined in wastewater purification prototype for efficient removal of different simulated wastewaters confirms its potential for real-world applications.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.biortech.2022.127018 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Construction of carbon dot-embedded fluorescent hydrogels based on oxidized gum arabic-gelatin Schiff base for Cr(VI) detection applications.
Int J Biol Macromol
January 2025
School of Chemical Engineering, Changchun University of Technology, Changchun 130012, PR China. Electronic address:
In this study, a novel nitrogen-doped carbon quantum dot/oxidized gum arabic-gelatin-based fluorescent probe (NAH) was prepared using gelatin (GL) and gum arabic (AG) biomolecules. The primary network structure of this hydrogel consisted of polyacrylamide (PAM), while a secondary network structure was constructed between oxidized gum arabic and gelatin through the reaction of the Schiff base, which significantly enhanced the mechanical properties, the stress and strain of NAH reached 266.47 KPa and 2175.
View Article and Find Full Text PDFOptimization of chromium (VI) reduction in aqueous solution using magnetic Fe3O4 sludge resulting from electrocoagulation process.
PLoS One
December 2024
School of Design, Informatics and Business, Abertay University, Dundee, United Kingdom.
The reuse of electro-coagulated sludge as an adsorbent for Cr(VI) ion reduction was investigated in this study. Electro-coagulated sludge was obtained during the removal of citric acid wastewater by the electrocoagulation process. The following parameters were optimized for Cr(VI) reduction: pH (5-7), initial Cr(VI) concentration (10-50 mg/L), contact time (10-45 min), and adsorbent dosage (0.
View Article and Find Full Text PDFAnchoring spinel cobalt and zinc ferrites on zeolite for highly synergic photocatalytic reduction of chromium (VI).
Sci Rep
December 2024
Department of Mining Engineering, Faculty of Engineering, University of Birjand, Birjand, Iran.
To tackle the challenges of increasing the efficiency of photocatalysts, a ternary magnetic heterojunction photocatalyst containing spinel cobalt and zinc ferrites, and zeolite (CZZ) was designed and fabricated. The physicochemical properties of the novel photocatalyst were verified using characterization techniques such as XRD, FT-IR, FE-SEM, EDS mapping, N adsorption-desorption, VSM, PL, and UV-Vis DRS. The CZZ photocatalyst exhibited a significant Cr (VI) reduction rate of 0.
View Article and Find Full Text PDFAmino-functionalized manganese oxide for effective hexavalent chromium adsorption.
Environ Sci Pollut Res Int
December 2024
Laboratory of Interface Materials Environment, Faculty of Sciences Ain Chock, Hassan II University, Casablanca, Morocco.
This study explores the use of functionalized manganese oxide (K-MnO-NH) for the removal of hexavalent chromium (Cr(VI)) ions, a highly toxic heavy metal contaminant, from wastewater. The synthesis of K-MnO-NH was achieved through a two-step process, followed by comprehensive characterization using various analytical techniques, which confirmed the material's formation as a pure phase. The K-MnO-NH exhibited exceptional chromium removal efficiency, achieving up to 90% (4.
View Article and Find Full Text PDFAdsorption of Cr(VI) Using Organoclay/Alginate Hydrogel Beads and Their Application to Tannery Effluent.
Gels
November 2024
Departamento de Ingeniería Química, Universidad Nacional de Colombia Sede Manizales, Campus La Nubia, km 9 vía al Aeropuerto, Manizales 170003, Colombia.
The tanning industry is among the most environmentally harmful activities globally due to the pollution of lakes and rivers from its effluents. Hexavalent chromium, a metal in tannery effluents, has adverse effects on human health and ecosystems, requiring the development of removal techniques. This study assessed the efficacy of organobentonite/alginate hydrogel beads in removing Cr(VI) from a fixed-bed adsorption column system.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!