We investigated the use of crystalline coatings as the highly reflective coating of an Yb:YAG thin disk directly bonded onto a silicon carbide heatsink. Compared to commonly used ion-beam-sputtered coatings, it possesses lower optical losses and higher thermal conductivity, resulting in better heat management and laser outputs. We pumped the disk up to 1.15 kW at 969 nm and reached 665 W of average output power, and disk temperature of 107 °C with a highly multi-modal V-cavity. These promising results were reached with this novel design despite the adoption of a cheap silicon carbide substrate having more than 3 times lower thermal conductivity compared to frequently used CVD diamond.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.450025 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Temperature-Dependent Formation of Carbon Nanodomains in Silicon Oxycarbide Glass-A Reactive Force Field MD Study.
J Phys Chem C Nanomater Interfaces
January 2025
Institute of General, Inorganic and Theoretical Chemistry Center for Chemistry and Biomedicine, University of Innsbruck, Innrain 80-82, A-6020 Innsbruck, Austria.
Novel anode materials for lithium-ion batteries (LIBs) are constantly being explored to further improve battery performance. In this work, ReaxFF molecular dynamics (MD) simulations are performed to model the early stages in the synthesis of nanostructured silicon carbide (SiC), which is one such promising material. The focus lies on its precursor, silicon oxycarbide glass of composition (SiOC) (17 mol% Si, 28 mol% O, and 54 mol% C), in the following referred to as SiOC.
View Article and Find Full Text PDFStudying the effect of processing parameters on the microstructure, strength, hardness, and corrosion characteristics of friction stir dissimilar welded AA5083 and AA7075 aluminum alloys reinforced with Al-SiC matrix.
Heliyon
January 2025
Department of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza, 12316, Egypt.
The complementary properties of corrosion resistance and ballistic resistance of AA5083 and AA7075, respectively, explain the significance of welding these two alloys in the marine armor industry. This study investigates a novel Al-SiC matrix reinforcement with a different SiC weight ratio in dissimilar friction stir welding of the AA5083/AA7075 joint at different transverse and rotational speeds. The study deduced that the novel matrix can play an important role in improving strength and ductility simultaneously.
View Article and Find Full Text PDFElectrically Pumped -BN Single-Photon Emission in van der Waals Heterostructure.
ACS Nano
January 2025
Department of Physics and Astronomy, Seoul National University, Seoul 08826, Korea.
Atomic defects in solids offer a versatile basis to study and realize quantum phenomena and information science in various integrated systems. All-electrical pumping of single defects to create quantum light emission has been realized in several platforms including color centers in diamond and silicon carbide, which could lead to the circuit network of electrically triggered single-photon sources. However, a wide conduction channel which reduces the carrier injection per defect site has been a major obstacle.
View Article and Find Full Text PDFElectromagnetic Interference Shielding Effectiveness of Pure SiC-TiSiC Composites Fabricated by Reactive Melt Infiltration.
Materials (Basel)
January 2025
State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China.
Silicon carbide-based titanium silicon carbide (SiC-TiSiC) composites with low free alloy content and varying TiSiC contents are fabricated by two-step reactive melt infiltration (RMI) thorough complete reactions between carbon and TiSi alloy in SiC-C preforms obtained. The densities of SiC-C preform are tailored by the carbon morphology and volumetric shrinkage of slurry during the gel-casting process, and pure composites with variable TiSiC volume contents are successfully fabricated with different carbon contents of the preforms. Due to the increased TiSiC content in the obtained composites, both electrical conductivity and electromagnetic interference (EMI) shielding effectiveness improved progressively, while skin depth exhibited decreased consistently.
View Article and Find Full Text PDFThe Overview of Silicon Carbide Technology: Status, Challenges, Key Drivers, and Product Roadmap.
Materials (Basel)
December 2024
Carnegie Mellon University, 5000 Forbes Avenue, Pittsburgh, PA 15213, USA.
Arguably, SiC technology is the most rapidly expanding IC manufacturing technology driven mostly by the aggressive roadmap for battery electric vehicle penetration and also industrial high-voltage/high-power applications. This paper provides a comprehensive overview of the state of the art of SiC technology focusing on the challenges starting from the difficult and lengthy SiC substrate growth all the way to the complex MOSFET assembly processes. We focus on the differentiation from the established Si manufacturing processes and provide a comprehensive list of references as well as a brief description of our own research into the key manufacturing processes in this technology.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!