Background: Success of all-ceramic restorations depends on their cementation process. Bonding crystalline materials like zirconia to an underlying substrate is challenging. Recently, universal adhesives have been developed. They claim to chemically bond to zirconia due to the presence of compounds like 10-methacryloyloxydecyl dihydrogen phosphate. But for majority of these adhesives, few studies demonstrating their effectiveness are available.

Aims: This study aimed to assess the effect of two universal adhesives, One Coat 7 Universal and Tetric N-Bond Universal on shear bond strength at zirconia-resin junction.

Materials And Methods: Thirty CAD-CAM milled zirconia cylinders (5 mm × 8 mm) were sandblasted and divided into three groups: Group A (control) received no treatment, while Groups B and C were primed by One Coat 7 Universal and Tetric N-Bond Universal, respectively. They were luted to composite surfaces by a dual-curing resin cement. After 24 h, a shear bond strength test was conducted and failure mode was analyzed.

Statistical Analysis: One-way analysis of variance and Tukey's test were used for statistical analysis.

Results: Both One Coat 7 Universal (24.43 ± 2.66 MPa) and Tetric N-Bond Universal (28.61 ± 3.11 MPa) had significantly higher strength than the control group (9.86 ± 2.00 MPa). Control group underwent 100% adhesive failures. Experimental groups had predominantly mixed/cohesive failures.

Conclusion: Both universal adhesives increased the bond strength at resin-zirconia junction. Tetric N-Bond Universal exhibited the highest strength.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8896137PMC
http://dx.doi.org/10.4103/jcd.jcd_293_21DOI Listing

Publication Analysis

Top Keywords

tetric n-bond
20
n-bond universal
20
coat universal
16
universal adhesives
16
bond strength
16
universal
12
universal tetric
12
shear bond
12
strength resin-zirconia
8
control group
8

Similar Publications

Bonding performance of universal adhesive systems to enamel - Effects of the acidic composition.

Dent Mater

December 2024

Graduate Program in Dentistry, School of Dentistry, Federal University of Rio Grande do Sul, Rua Ramiro Barcelos, Porto Alegre 2492, Brazil; Department of Conservative Dentistry, School of Dentistry, Federal University of Rio Grande do Sul, Rua Ramiro Barcelos, Porto Alegre 2492, Brazil. Electronic address:

Objectives: To evaluate the self-etch bonding potential of universal adhesive systems with varying acidic compositions by analyzing the wettability properties, topographical change, and microshear bond strength (µSBS) to enamel.

Methods: Eight universal adhesives were tested: All-Bond Universal (Bisco), Ambar Universal (FGM), Gluma Bond Universal (Kulzer), OptiBond Universal (Kerr), Peak Universal Bond (Ultradent), Prime&Bond Universal (Dentsply), Singlebond Universal (3 M ESPE), and Tetric N-Bond Universal (Ivoclar). Bovine incisors were prepared and treated with each adhesive according to the manufacturer's instructions.

View Article and Find Full Text PDF

Background: Non-carious cervical lesions (NCCLs) present themselves as smooth saucer lesions with variable height and depth. Treatment of choice for these lesions should be aimed at conservative management by restoring the teeth. The present study aims to evaluate the micro-tensile bond strength in NCCLs after various surface pre-treatments.

View Article and Find Full Text PDF

Background: The pre-polymerization temperature of resin composite restorative materials could influence their adaptation to cavity details. As a current debate is existing about the refrigeration of resin composite restorative materials, this study was designed to assess the effect of refrigeration of 3 types of resin composite restorative materials with different matrix systems on their marginal adaptation in Class II restorations.

Methods: Forty-two sound maxillary molars, each with two separated Class II cavities, were used in this study.

View Article and Find Full Text PDF

Objective:  This study investigates the effect of different chemical surface treatment protocols with different functional monomers of universal adhesives on the shear bond strength between resin-matrix ceramic and resin composite.

Materials And Methods:  Eighty resin-matrix ceramics (Shofu block HC) were built and designed into eight groups of ten specimens and surface treated with HC primer (HC) and/or three universal adhesives (single bond universal [SBU], Scotchbond universal plus [SBP], and Tetric N-bond universal [TNU]) assigning follows; group 1, nonsurface treated; group 2, HC; group 3, SBU; group 4, HC + SBU; group 5, SBP; group 6, HC + SBP; group 7, TNU; group 8, HC + TNU. A template was put on the specimen center, and then pushed packable resin composite.

View Article and Find Full Text PDF

The effect of different cavity liners on the shear bond strength of nanocomposite to dentin is of interest. A total of sixty extracted caries-free maxillary, mandibular molars were randomly assigned to four groups in the following manner Group 1: control (no cavity liner), group 2: Biodentin, group 3: Apacal ART and Group 4: Giomer. Following the application of different cavity liners based on the groups, restoration was carried out using nanocomposite resin using the total-etch Tetric N bond adhesive.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!