The aim of this article is to comprehensively review the revolution of dental zirconia (Zir), including its types, properties, applications, and cementation procedures. A comprehensive search of PubMed and Embase was conducted. The search was limited to manuscripts published in English. The final search was conducted in October 2021. Newly developed monolithic Zir ceramics have substantially enhanced esthetics and translucency. However, this material must be further studied in vitro and in vivo to determine its long-term ability to maintain its exceptional properties. According to the literature, monolithic translucent Zir has had promising results and a high survival rate. Thus, the utilization of this material is indicated when strength and esthetics are needed. Both the materials and methods used for cementation of monolithic Zir have significantly improved, encouraging dentists to use this material, especially when a conservative approach is required. Zir restorations showed promising outcomes, particularly for monolithic Zir crowns supported with implant and fixed dental prostheses.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8911694 | PMC |
| http://dx.doi.org/10.3390/molecules27051699 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The influence of core-build up materials on biaxial flexural strength of strength-gradient zirconia and lithium disilicate ceramics: an in-vitro study.
Sci Rep
December 2024
Department of Applied Dental Sciences, Faculty of Applied Medical Science, Jordan University of Science and Technology, Irbid, Jordan.
The aim of this study was to investigate the effect of using different core build-up materials on biaxial flexural strength (BFS) of multilayered strength-gradient zirconia ceramic in comparison to lithium disilicate ceramic. Thirty zirconia discs were fabricated from IPS e.max ZirCAD Prime (Zir), 30 discs from IPS e.
View Article and Find Full Text PDFEvaluating the clinical behavior of veneered zirconia in comparison with monolithic zirconia complete arch implant-supported prostheses: A systematic review and meta-analysis.
J Prosthet Dent
November 2024
Professor and Department Chair, Department of Restorative Dentistry and Biomaterials Sciences, Harvard School of Dental Medicine, Boston, Mass.
Statement Of Problem: Because the use of zirconia in dentistry is relatively new, the number of published studies on the subject is scarce, even though material selection is an important factor in clinical performance. Therefore, a systematic assessment of the impact of the prosthetic material, framework design, veneering material, and manufacturing process is required.
Purpose: The purpose of this systematic review and meta-analysis was to investigate the survival and success rates of feldspathic porcelain veneered zirconia (VZir) in comparison with monolithic zirconia (MZir) complete arch implant-supported prostheses (CAISPs).
Evaluation of the fracture resistance and failure types of different CAD-CAM ceramic crowns supported by angled titanium abutments.
J Prosthodont
August 2023
Department of Prosthodontics, Sivas Cumhuriyet University, Sivas, Turkey.
Purpose: To evaluate the fatigue resistance of computer-aided design and computer-aided manufacturing (CAD-CAM) single-ceramic crowns which were applied on angled implant abutments after thermomechanical aging.
Materials And Methods: Titanium abutments (N = 72, MODE Medical Dental Implant, Turkey) with three different angles (0˚, 15°, and 25°) were restored using different materials (monolithic zirconia [Zir], lithium silicate ceramic reinforced by zirconia [VS], and hybrid ceramic [VE]). Crowns in the maxillary first premolar form were cemented to abutments using resin cement (Panavia 2.
Masking ability of implant abutment substrates by using different ceramic restorative systems.
J Prosthet Dent
September 2022
Associate Professor, Post-Graduate Program in Oral Sciences (Prosthodontics Units), Faculty of Odontology, Federal University of Santa Maria (UFSM), Santa Maria, Rio Grande do Sul State, Brazil.
Statement Of Problem: Information regarding the masking ability of ceramic crowns over different implant abutment materials is scarce.
Purpose: The purpose of this in vitro study was to evaluate the masking ability of different monolithic or bilayer ceramic materials with different thicknesses over substrates indicated for implant restorations by using opaque and translucent evaluation pastes.
Material And Methods: Disk-shaped specimens, shade A1 (VITA Classic; Ø10×1.
Accuracy of Digital Impression Taking with Intraoral Scanners and Fabrication of CAD/CAM Posts and Cores in a Fully Digital Workflow.
Materials (Basel)
June 2022
Department of Prosthodontics, Dental Clinic, Justus Liebig University, Schlangenzahl 14, 35392 Giessen, Germany.
Current intraoral scanners (IOS) enable direct impression taking for computer-aided de-sign/computer-aided manufacturing (CAD/CAM) posts and cores (P+C) with subsequent milling out of monolithic materials. The aim of this in vitro study was to systematically investigate the accuracy of CAD/CAM-P+C in a fully digital workflow, considering different IOS impression methods (Primescan (PRI), Trios4 without (TRI) and with scanpost (TRI+SP)) (Part A), and CAD/CAM milling of zirconium dioxid (ZIR) and resin composite (COM)-P+C (Part B). Five human models were developed in this study.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!