: Despite substantial research on early hominin lithic technologies, the learning mechanisms underlying flake manufacture and use are contested. To draw phylogenetic inferences on the potential cognitive processes underlying the acquisition of both of these abilities in early hominins, we investigated if and how one of our closest living relatives, chimpanzees ( ), could learn to make and use flakes. : Across several experimental conditions, we tested eleven task-naïve chimpanzees (unenculturated n=8, unknown status n=3) from two independent populations for their abilities to spontaneously make and subsequently use flakes as well as to use flakes made by a human experimenter. : Despite the fact that the chimpanzees seemed to understand the requirements of the task, were sufficiently motivated and had ample opportunities to develop the target behaviours, none of the chimpanzees tested made or used flakes in any of the experimental conditions. : These results differ from all previous ape flaking experiments, which found flake manufacture and use in bonobos and one orangutan. However, these earlier studies tested human-enculturated apes and provided test subjects with flake making and using demonstrations. The contrast between these earlier positive findings and our negative findings (despite using a much larger sample size) suggests that enculturation and/or demonstrations may be necessary for chimpanzees to acquire these abilities. The data obtained in this study are consistent with the hypothesis that flake manufacture and use might have evolved in the hominin lineage after the split between and 7 million years ago, a scenario further supported by the initial lack of flaked stone tools in the archaeological record after this split. We discuss possible evolutionary scenarios for flake manufacture and use in both non-hominin and hominin lineages.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7612464 | PMC |
http://dx.doi.org/10.12688/openreseurope.13186.2 | DOI Listing |
Small
December 2024
School of Mechanical and Materials Engineering, Indian Institute of Technology Mandi, Himachal Pradesh, 175075, India.
The interfacial adhesion between transition metal dichalcogenides (TMDs) and the growth substrate significantly influences the employment of flakes in various applications. Most previous studies have focused on MoS and graphene, particularly their interaction with SiO/Si substrates. In this work, the adhesion strength of CVD-grown bilayer WS is directly measured using the nano scratch technique on three different substrates-Sapphire, SiO/Si, and fused quartz.
View Article and Find Full Text PDFNanotechnol Sci Appl
December 2024
Institute of Mechanics and Printing, Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, Warsaw, Poland.
Introduction: The rapid growth of flexible and wearable electronics has created a need for materials that offer both mechanical durability and high conductivity. Textile electronics, which integrate electronic pathways into fabrics, are pivotal in this field but face challenges in maintaining stable electrical performance under mechanical strain. This study develops highly stretchable silver multi-walled carbon nanotube (Ag-MWCNT) composites, tailored for screen printing and heat-transfer methods, to address these challenges.
View Article and Find Full Text PDFAdv Mater
December 2024
Department of Mechanical & Industrial Engineering (MIE), University of Toronto, Toronto, Ontario, M5S 3G8, Canada.
MXene has garnered growing interest in the field of electrochemistry, thanks to its unique electrical and surface characteristics. Nonetheless, significant challenges persist in realizing its full potential in chemoresistive sensing applications. In this study, a novel unidirectional freeze-casting approach for fabricating a Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-facilitated vertically aligned MXene-based aerogel with enhanced chemoresistive sensing properties was introduced.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Department of Electrical and Computer Engineering, Western University, London, ON N6A 5B9, Canada.
The increasing adoption of distributed recycling via additive manufacturing (DRAM) has facilitated the revalorization of materials derived from waste streams for additive manufacturing. Recycled materials frequently contain impurities and mixed polymers, which can degrade their properties over multiple cycles. This degradation, particularly in rheological properties, limits their applicability in 3D printing.
View Article and Find Full Text PDFNanoscale
November 2024
Univ. Bordeaux, CNRS, Bordeaux INP, ISM, UMR 5255, F-33400 Talence, France.
Tip-enhanced Raman spectroscopy (TERS) is a powerful technique for nanoscale chemical imaging. However, its worldwide expansion is still limited by the challenging fabrication of cheap, robust and efficient TERS tips as optical nanosources to amplify the Raman signal. An original method based on bipolar electrodeposition is described here to prepare gold-coated AFM cantilevers used as TERS tips.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!