Impact of resin loading on ion exchange equilibrium for removal of organic matter and inorganic ions.

Ion Exchange (IEX) applications for drinking water can be limited due to high volumes of brine, brine waste and treated water corrosivity. Reusing the resin by operating at reduced regeneration frequency can overcome this. However, assessing changes on the resin loading over reuse cycles is complex because multiple presaturant ions participate in the exchange and existing models only account for the exchange with one presaturant ion. This study developed a theoretical multicomponent model for the determination of IEX equilibria when the resin loading increases due to reuse. The model suggested that both electrostatic interactions and admicelle formation were the separation mechanisms. The model revealed that under reduced regeneration frequencies, brine use and waste generation can be reduced by more than 90%, where the bicarbonate-form resin offered the potential for lower corrosivity. However, changes in resin loading after 5 reuse cycles showed that the risk of corrosion increased. For the tested source water, reusing the bicarbonate-form resin every 5 cycles would achieve the most sustainable option with 41% NOM removal and 79% brine and waste reduction. Under these conditions, almost 100% of exchange capacity is recovered after regeneration.