Sacrificial Co-solvent Electrolyte to Construct a Stable Solid Electrolyte Interphase in Lithium-Oxygen Batteries.

ACS Appl Mater Interfaces

State Key Lab of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, 1295 Dingxi Road, Shanghai 200050, P. R. China.

Published: March 2022

Lithium-oxygen batteries are vital devices for electrochemical energy storage. The electrolyte is a crucial factor for improving battery performance. The high reactivity of lithium metal induces side reactions with organic electrolytes, thus leading to an unstable interface between the anode and electrolyte and poor performance of batteries. In this work, to compensate for the above shortcomings, 1-methylimidazole (MeIm) is introduced to the tetraethylene glycol dimethyl ether (TEGDME) electrolyte to form the TEGDME/MeIm co-solvent electrolyte. Because of the high donor number value of MeIm, the solution-based pathway of discharge products can be triggered. Compared with the single TEGDME electrolyte, the discharge capacity with the TEGDME/MeIm co-solvent electrolyte is increased by more than 2 times. Moreover, the TEGDME/MeIm co-solvent electrolyte can promote the dissociation of Li salt due to the high dielectric constant of MeIm and thus make up for the shortcomings of TEGDME. In addition, due to the lower energy than the lowest unoccupied molecular orbital (LUMO) level of TEGDME, MeIm is decomposed preferentially, and a dense solid electrolyte interphase (SEI) layer is constructed. Then, the decomposition of TEGDME is suppressed. Therefore, the cycle performance of the battery with the TEGDME/MeIm co-solvent electrolyte is 18 times compared to that with the single TEGDME electrolyte.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.1c22987DOI Listing

Publication Analysis

Top Keywords

co-solvent electrolyte
20
tegdme/meim co-solvent
16
electrolyte
12
tegdme electrolyte
12
solid electrolyte
8
electrolyte interphase
8
lithium-oxygen batteries
8
compared single
8
single tegdme
8
tegdme
6

Similar Publications

Inner Helmholtz layer control through co-solvent strategies for high-performance copper hexacyanoferrate//zinc battery.

J Colloid Interface Sci

December 2024

Department of Mechanical Engineering, University of Alberta, 9211-116 Street NW., Edmonton, Alberta T6G 1H9, Canada. Electronic address:

Copper hexacyanoferrate (CuHCF) demonstrates high working voltage, convenient synthesis methods, and economic benefits. However, capacity decay of CuHCF//Zn full cells is usually observed in aqueous electrolytes due to the dissolution of Cu and Fe, as indicated by the irreversible insertion of Zn ions and the consequent formation of ZnCuHCF. To address these challenges, a cathode-oriented electrolyte engineering design employing a methyl acetate (MA) co-solvent with zinc triflate (Zn(OTf)) salt electrolyte is implemented.

View Article and Find Full Text PDF

Electrolyte design for reversible zinc metal chemistry.

Nat Commun

January 2025

School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore, Singapore.

Article Synopsis
  • Metal anodes show potential for future energy storage, but issues like dendrite formation and chemical reactions make them hard to use efficiently.
  • Researchers developed a specialized electrolyte that enhances efficiency to over 99.9% for zinc metal anodes by adjusting salts and solvents for better surface structure and anode-electrolyte interaction.
  • The new dual-salt electrolyte achieves a Coulombic efficiency of 99.95% and allows for an anode-free cell to operate stably for over 1000 cycles, indicating significant advancements in metal-based battery technologies.
View Article and Find Full Text PDF

Engineering Electrolyte Network Structure for Improved Kinetics and Dendrite Suppression in Zn-S Batteries.

Angew Chem Int Ed Engl

November 2024

State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, and College of Materials Science and Engineering, Donghua University, Shanghai, 201620, China.

Article Synopsis
  • * This study explores how adding propylene glycol methyl ether (PM) and zinc iodide (ZnI) to the electrolyte improves the battery's performance by enhancing redox reactions and electron transfer.
  • * The combined effect of PM and the iodine/redox mediator allows the Zn-S battery to achieve a remarkable capacity of 1456 mAh/g and an energy density of 471.8 Wh/kg at a current density of 0.2 A/g.
View Article and Find Full Text PDF

Unraveling the Multifunctional Mechanism of Fluoroethylene Carbonate in Enhancing High-Performance Room-Temperature Sodium-Sulfur Batteries.

Angew Chem Int Ed Engl

November 2024

i-Lab, iVacuum interconnected Nanotech Workstation (Nano-X), iSuzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences, Suzhou, Jiangsu, 215123, China.

Room-temperature sodium-sulfur (RT Na-S) batteries has attracted growing attentions in large-scale energy storage technology, while the serious shuttle effect and interface side reaction limit its practical application. Despite fluoroethylene carbonate (FEC) has been widely used as an electrolyte additive or co-solvent to facilitate the optimization of electrode-electrolyte interphase in RT Na-S batteries, its crucial influence and mechanism have not been clearly understood. Herein, we deeply reveal the two-steps cathode-electrolyte interphase (CEI) formation by using FEC as the exclusive electrolyte solvent.

View Article and Find Full Text PDF

Highly Solvating Electrolytes with Core-Shell Solvation Structure for Lean-Electrolyte Lithium-Sulfur Batteries.

Angew Chem Int Ed Engl

November 2024

Beijing Key Laboratory for Theory and Technology of Advanced Battery Materials, School of Materials Science and Engineering, Peking University, Beijing, 100871, China.

The practical energy density of lithium-sulfur batteries is limited by the low sulfur utilization at lean electrolyte conditions. The highly solvating electrolytes (HSEs) promise to address the issue at harsh conditions, but the conflicting challenges of long-term stability of radical-mediated sulfur redox reactions (SRR) and the poor stability with lithium metal anode (LMA) have dimmed the efforts. We now present a unique core-shell solvation structured HSE formulated with classical ether-based solvents and phosphoramide co-solvent.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!