Glass-Crystallized Luminescence Translucent Ceramics toward High-Performance Broadband NIR LEDs.

Adv Sci (Weinh)

State Key Lab of Modern Optical Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou, 310027, P. R. China.

Published: March 2022

Near-infrared (NIR) phosphor-converted light-emitting diodes (pc-LEDs) are newly emergent broadband light sources for miniaturizing optical systems like spectrometers. However, traditional converters with NIR phosphors encapsulated by organic resins suffer from low external quantum efficiency (EQE), strong thermal quenching as well as low thermal conductivity, thus limiting the device efficiency and output power. Through pressureless crystallization from the designed aluminosilicate glasses, here broadband Near-infrared (NIR) emitting translucent ceramics are developed with high EQE (59.5%) and excellent thermal stability (<10% intensity loss and negligible variation of emission profile at 150 °C) to serve as all-inorganic visible-to-NIR converters. A high-performance NIR phosphor-converted light emitting diodes is further demonstrated with a record NIR photoelectric efficiency (output power) of 21.2% (62.6 mW) at 100 mA and a luminescence saturation threshold up to 184 W cm . The results can substantially expand the applications of pc-LEDs, and may open up new opportunity to design efficient broadband emitting materials.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8922114PMC
http://dx.doi.org/10.1002/advs.202105713DOI Listing

Publication Analysis

Top Keywords

translucent ceramics
8
near-infrared nir
8
glass-crystallized luminescence
4
luminescence translucent
4
ceramics high-performance
4
high-performance broadband
4
nir
4
broadband nir
4
nir leds
4
leds near-infrared
4

Similar Publications

Two 3D-printed crown materials (Crown and Ceramic Crown) were examined to determine the best surface treatment and primers for bonding. Discs of the two materials were printed and mounted with their "intaglio" surfaces untouched. Half the specimens from each group were sandblasted with 50 µm alumina.

View Article and Find Full Text PDF

Biaxial Flexural Strength and Vickers Hardness of 3D-Printed and Milled 5Y Partially Stabilized Zirconia.

J Funct Biomater

January 2025

Department of Prosthodontics, Medical Faculty, Heidelberg University, Im Neuenheimer Feld 400, 69120 Heidelberg, Germany.

This study compares the mechanical properties of 5-mol% yttria partially stabilized zirconia (5Y-PSZ) materials, designed for 3D printing or milling. Three 5Y-PSZ materials were investigated: printed zirconia (PZ) and two milled zirconia materials, VITA-YZ-XT (MZ-1) and Cercon xt (MZ-2). PZ samples were made from a novel ceramic suspension via digital light processing and divided into three subgroups: PZ-HN-ZD (horizontal nesting, printed with Zipro-D Dental), PZ-VN-Z (vertical nesting, printed with Zipro-D Dental) and PZ-VN-Z (vertical nesting, printed with Zipro Dental).

View Article and Find Full Text PDF

Effect of crystallization temperature on the flexural strength of lithium disilicate glass ceramics.

J Prosthodont

January 2025

Division of Prosthodontics, Department of Restorative Sciences, University of Minnesota, Minneapolis, Minnesota, USA.

Purpose: This pilot study aimed to compare the flexural strength of Amber Mill CAD to IPS e.max CAD and to determine the impact of different crystallization protocols on the flexural strength of Amber Mill CAD ceramics.

Materials And Methods: Amber Mill CAD ceramic blocks of a known Vita Classic shade were selected for testing against control IPS e.

View Article and Find Full Text PDF

Objective: To synthesize bilayer zirconia systems based on commercial or recycled 3Y-TZP obtained from non-milled remnants and to compare their optical and mechanical properties before and after aging.

Methods: Bilayer zirconia samples were fabricated using either recycled 3Y-TZP (3Y-R/4Y and 3Y-R/5Y) or commercial powders (3Y/4Y and 3Y/5Y). Microstructure and phase composition were analyzed using ScanningElectronMicroscopy (SEM) and X-Ray Diffraction (XRD).

View Article and Find Full Text PDF

Purpose: To assess the impact of staining and multiple firings on the mechanical, optical, and surface characteristics of zirconia-containing lithium silicate ceramics (ZLS).

Materials And Methods: Ninety ZLS discs (Suprinity, VITA Zahnfabrick) were divided according to the "Number of firings" protocol: Ctr-control, no characterization; SC-single firing cycle (for characterization, crystallization and staining simultaneously); and DC-double firing cycle (crystallization firing cycle was performed separately from the staining firing). Extrinsic pigmentation was performed to replicate the characterization of a monolithic restoration.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!