Solar distillation meets the real world: a review of solar stills purifying real wastewater and seawater.

Solar energy-driven evaporation-based freshwater production is one of the sustainable ways to purify contaminated/salty water. Recent advances in solar absorbers' assemblies, design modifications, and integrations with heating sources improved the rate of freshwater productivity. However, the type of feed water affects the evaporation rate in a solar desalination system (SDS). Many studies used tap water with added contaminants to test the performance of a SDS and studied the water quality improvement. As a typical result, pH, total dissolved solids (TDS), and electrical conductivity (µS/cm) are reduced after solar evaporation. The performance of SDSs for real wastewaters are also important to understand, e.g., the reduction of high organic pollutants after solar evaporation. In this aspect, the main objective of the present work is to review solar distillation of real wastewaters and seawater by using SDSs. Further, the mechanism of a solar distiller with heat transfer principles, parameters affecting evaporation process, real wastewaters and seawaters purified in a solar distillation system, improvement of various parameters before and after solar evaporation, pathways of handling wastewaters, challenges, and future perspectives are discussed. Conclusively, SDSs are found to remove pollutants effectively after solar evaporation. The evaporation rate is relatively slower due to high concentration of pollutants that reduce vapor pressure. The COD removal of various real wastewaters, including sludge, kitchen, textile, palm oil, petroleum, water plant, and municipal wastewaters, was 98.13%, 97.85%, 96.84%, 96.71%, 87.99%, 86.99%, and 85.67%, respectively. The reduction rate of salt concentration in real seawater after evaporation in the solar distiller was 99.99%.