Ion exchange and adsorption of cadmium from aqueous media in sodium-modified expanded vermiculite.

Environ Sci Pollut Res Int

Department of Processes and Products Design, School of Chemical Engineering, University of Campinas, Albert Einstein Avenue, 500, Campinas, São Paulo, 13083-852, Brazil.

Published: November 2022

The use of mineral clays as alternative adsorbent has received attention due to their physicochemical characteristics, superficial negative charge, abundance of vermiculite (especially in Brazil), low cost, and chemical composition, which allows the material modification to increase the adsorptive capacity. This manuscript evaluated the use of expanded vermiculite (EV) and sodium-modified vermiculite (VNa) in the adsorption and ion exchange of Cd ions. The sodification was successfully carried out making the ion exchange capacity greater in the modified clay, confirmed by EDX, cation exchange capacity (CEC), DRX, and FTIR analysis. The CEC was 210 and 233 mEq/100 g for the EV and VNa, respectively, with 97.8% exchangeable ion (Na) in the VNa. FTIR spectra showed small variations in the groups related to ion exchange and XRD analysis indicated changes in the distance of the layers with loss of crystallinity after clay modification, which was recovered after cadmium adsorption. The kinetics became faster with an equilibrium time of 10 min for VNa and 45 min for EV. Cd removal by vermiculite above 99% was achieved. Pseudo-second order model best described the kinetics, in which the resistance to mass transfer in external film is the limiting step of the process and, once this resistance is overcome, the ion exchange happens quickly. Despite the decrease in surface area after sodification, the adsorptive capacity increased 158% in the sodified adsorbent, from 0.107 mmol/g for EV to 0.276 mmol/g for VNa, under the evaluated conditions.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s11356-021-16841-8DOI Listing

Publication Analysis

Top Keywords

ion exchange
20
expanded vermiculite
8
adsorptive capacity
8
exchange capacity
8
ion
6
vermiculite
5
vna
5
exchange
5
exchange adsorption
4
adsorption cadmium
4

Similar Publications

Article Synopsis
  • A magnesium-aluminum layered double hydroxide (LDH) was created using a coprecipitation technique from a nitrate solution and transformed into a layered double oxide (LDO) after being heated to 450 °C.
  • During rehydration in a fluoride solution, the LDH's original structure was restored and fluoride ions were absorbed to maintain balance, a finding confirmed by energy-dispersive X-ray spectroscopy (EDS).
  • The study demonstrated that using ethanol during the rehydration process significantly increased fluoride incorporation, and the fluoride release pattern from the material revealed a rapid initial release followed by a slower, prolonged release.
View Article and Find Full Text PDF

Brochantite was precipitated using stoichiometric amounts of CuSO and NaOH and characterized by scanning electron microscopy, specific surface area, thermogravimetric analysis, and zeta potential. Brochantite can be converted into paratacamite, basic copper bromide, and copper phthalate by shaking the powder with solutions containing excess corresponding anions. By contrast, attempts to convert brochantite into basic iodide, acetate, nitrate, or rhodanide in a similar way failed, that is, the powder after shaking with solutions containing excess corresponding anions still showed the powder X-ray diffraction pattern of brochantite.

View Article and Find Full Text PDF

Template-assembly activation of primer exchange reaction for on-site and sensitive detection of copper ions in blood.

Spectrochim Acta A Mol Biomol Spectrosc

January 2025

The First Clinical Medical College, Shandong University of Traditional Chinese Medicine, Jinan, 250355, PR China; Department of Pharmacy, Affiliated Hospital of Shandong University of Traditional Chinese Medicine, Jinan 250014, PR China. Electronic address:

The sensitive and accurate detection of copper ions is crucial for public health, medical research, and environmental monitoring. In this study, we developed a sensor based on template-assembly activation of the primer exchange reaction (PER) for the on-site detection of copper ions in blood. Copper ions triggered the assembly of two template fragments into a hairpin structure via a click-chemistry reaction, activating the PER.

View Article and Find Full Text PDF

Flow-Electrode capacitive deionization for enhanced selective separation of Ammonia, Phosphorus, and caproate from sewage sludge fermentation: Performance and mechanistic insights.

Bioresour Technol

January 2025

School of Environment and Ecology, Jiangnan University, Wuxi 214122 China; Jiangsu Collaborative Innovation Center of Water Treatment Technology and Material, Suzhou University of Science and Technology, Suzhou 215011 China. Electronic address:

Caproic acid has broad applications and can be produced from activated sludge via fermentation, but its quality is hindered by ammonia (NH-N) and reactive phosphorus (RP) in the fermentation broth. However, flow-electrode capacitive deionization (FCDI), a novel ion separation technology that operates continuously without secondary pollution seems to be an efficient process that separates the ions. The results showed that at pH 5.

View Article and Find Full Text PDF

One method of achieving spatially specific, multi-component nanoheterostructures is to combine multiple forms of post-synthetic modification. Applying cation or anion exchange to CuS nanorods creates complex nanoheterostructures. Combining such anion and cation exchanges generates a system which uncovers the interplay between these two processes and understands the cooperativity between postsynthetic modifications more broadly.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!