Degradable poly(acrylic acid) has been prepared via free radical ring-opening copolymerization of tert-butyl acrylate and 2-methylene-1,3-dioxepane followed by tert-butyl deprotection, under acidic conditions. The resulting degradable poly(acrylic acid) analogue possesses ester groups within the backbone, which facilitate environmental hydrolysis into short chain oligomers, which subsequently undergo biodegradation. The degradable poly(acrylic acid) reported displays a significant degree of biodegradability (27.50% in 28 days) under environmental conditions, when compared to a conventional all carbon backbone non-degradable version, which shows no biodegradability.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.chemosphere.2021.133487 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Nanoarchitectonics of a Skin-Like Polymeric Hydrogel with High Anti-Swelling and Self-Adhesion Performance for Underwater Communication.
Macromol Rapid Commun
January 2025
Qingdao Innovation and Development Center, Harbin Engineering University, Qingdao, 266000, China.
Hydrogels are flexible materials characterized by a 3D network structure, which possess high water content and adjustable physicochemical properties. They have found widespread applications in tissue engineering, electronic skin, drug delivery, flexible sensors, and photothermal therapy. However, hydrogel networks often exhibit swelling behavior in aqueous environments, which can result in structural degradation and a loss of gel performance.
View Article and Find Full Text PDFA potential eco-friendly degradation of methyl orange by water-ball (sodium polyacrylate) stabilized zero valent iron nanoparticles.
Heliyon
January 2025
Department of Pharmaceutical Science, Faculty of Pharmacy, Umm Al-Qura University, Makkah, P.O. Box 751, Saudi Arabia.
This study presents the synthesis and application of water-ball (sodium polyacrylate) stabilized zero-valent iron nanoparticles (wb@Fe) for the eco-friendly degradation of Methyl Orange (MO). The nanoparticles were prepared using a chemical reduction method using NaBH. Characterization techniques including Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), and X-ray Diffraction (XRD) were employed to analyze the morphology, elemental composition, valent state and crystallinity of the nanoparticles.
View Article and Find Full Text PDFPreparation of Novel Slow-Release Acid Materials for Oilfield Development via Encapsulation.
Materials (Basel)
December 2024
Department of Chemical Engineering, Tsinghua University, Beijing 100084, China.
Acid-fracturing technology has been applied to form pathways between deep oil/gas resources and oil production pipelines. The acid fracturing fluid is required to have special slow-release performance, with no acidity at low temperatures, while steadily generating acid at high temperatures underground. At present, commercial acid systems in oilfields present problems such as the uncontrollable release effect, high costs, and significant pollution.
View Article and Find Full Text PDFPoly(Acrylic Acid)/TiO Nanocomposite Hydrogels for Paper Artwork Cleaning and Protection.
Molecules
December 2024
Department of Chemical Engineering Materials Environment, Sapienza University of Rome, Via del Castro Laurenziano 7, 00161 Rome, Italy.
Paper-based artworks are prone to natural aging processes driven by chemical and biological processes. Numerous treatments have been developed to mitigate deterioration and prevent irreversible damage. In this study, we investigated the use of poly(acrylic acid)/TiO composite hydrogels, combining their cleaning and protective functions in a minimally invasive treatment.
View Article and Find Full Text PDFThe Stability Evaluation of Ceria Slurry Using Polymer Dispersants with Varying Contents for Chemical Mechanical Polishing Process.
Polymers (Basel)
December 2024
Department of Chemistry, University of Hannam, Daejeon 34430, Republic of Korea.
The chemical mechanical polishing/planarization (CMP) is essential for achieving the desired surface quality and planarity required for subsequent layers and processing steps. However, the aggregation of slurry particles caused by abrasive materials can lead to scratches, defects, increased surface roughness, degradation the quality and durability of the finished surface after milling processes during the CMP process. In this study, ceria slurry was prepared using polymer dispersant with zinc salt of ethylene acrylic acid (EAA) copolymer at different contents of 5, 6, and 7 wt% (denoted as D5, D6, and D7) to minimize particle aggregation commonly observed in CMP slurries.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!