Chemically controlled megasonic cleaning of patterned structures using solutions with dissolved gas and surfactant.

Acoustic cavitation is used for megasonic cleaning in the semiconductor industry, especially of wafers with fragile pattern structures. Control of transient cavitation is necessary to achieve high particle removal efficiency (PRE) and low pattern damage (PD). In this study, the cleaning performance of solutions with different concentrations of dissolved gas (H) and anionic surfactant (sodium dodecyl sulfate, SDS) in DIW (DI water) on silicon (Si) wafers was evaluated in terms of PRE and PD. When only DIW was used, PRE was low and PD was high. An increase in dissolved H gas concentration in DIW increased PRE; however, PD also increased accordingly. Thus, we investigated the megasonic cleaning performance of DIW and H-DIW solutions with various concentrations of the anionic surfactant, SDS. At 20 ppm SDS in DIW, PRE reached a maximum value and then decreased with increasing concentration of SDS. PRE decreased slightly with increasing concentrations of SDS surfactant when dissolved in H-DIW. Furthermore, PD decreased significantly with increasing concentrations of SDS surfactant in both DIW and H-DIW cases. A high-speed camera setup was introduced to analyze bubble dynamics under a 0.96 MHz ultrasonic field. Coalescence, agglomeration, and the population of multi-bubbles affected the PRE and PD of silicon wafers differently in the presence of SDS surfactant. We developed a hypothesis to explain the change in bubble characteristics under different chemical environmental conditions.