Magnetic metallic nanoparticles (MNPs) of Ni, Ni82Fe18, Ni50Fe50, Ni64Fe36, and Fe were prepared by the technique of the electrical explosion of metal wire. The average size of the MNPs of all types was in the interval of 50 to 100 nm. Magnetic polymeric composites based on polyvinyl butyral with embedded metal MNPs were synthesized and their structural, adhesive, and magnetic properties were comparatively analyzed. The interaction of polyvinyl butyral (supplied as commercial GE cryogenic varnish) with metal MNPs was studied by microcalorimetry. The enthalpy of adhesion was also evaluated. The positive values of the enthalpy of interaction with GE increase in the series Ni82Fe18, Ni64Fe36, Ni50Fe50, and Fe. Interaction of Ni MNPs with GE polymer showed the negative change in the enthalpy. No interfacial adhesion of GE polymer to the surface of Fe and permalloy MNPs in composites was observed. The enthalpy of interaction with GE polymer was close to zero for Ni95Fe5 composite. Structural characterization of the GE/Ni composites with the MNPs with the lowest saturation magnetization confirmed that they tended to be aggregated even for the materials with lowest MNPs concentrations due to magnetic interaction between permalloy MNPs. In the case of GE composites with Ni MNPs, a favorable adhesion of GE polymer to the surface of MNPs was observed.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8706494 | PMC |
| http://dx.doi.org/10.3390/s21248311 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A UV-Protective Textile Coating Based on Recycled Poly(vinyl butyral) (PVB): A New Life for a Waste Polymer.
Polymers (Basel)
December 2024
Next Technology Tecnotessile, Via del Gelso 13, 59100 Prato, Italy.
Polyvinyl butyral (PVB) is a high-performance thermoplastic polymer, commonly used as an interlayer material in laminated safety glass for the automotive and architectural sectors. Currently, there is no end-of-life cycle program for a substantial amount of PVB film, which mainly ends up in landfills. According to a circular approach, PVB can be revalorized after efficient separation and recovery from glass.
View Article and Find Full Text PDFHumidity Resistant Biodegradable Starch Foams Reinforced with Polyvinyl Butyral (PVB) and Chitosan.
Polymers (Basel)
December 2024
Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, MI 48824, USA.
In this study, water-insoluble, moisture-resistant starch foams were prepared using an optimized one-step extrusion-foaming process in a ZSK-30 twin screw extruder. The extrusion parameters, including temperature, screw configuration, die diameter, water content, and feeding rates, were optimized to achieve foams with the lowest density and controlled expansion. A screw configuration made up of three kneading sections was found to be the most effective for better mixing and foaming.
View Article and Find Full Text PDFOverlooked Impact of Moisture on the Stability of Printing Ink and Its Impact on Recycled Low-Density Polyethylene (LDPE) Quality.
Polymers (Basel)
November 2024
Circular Resource Engineering and Management (CREM), Hamburg University of Technology (TUHH), Blohm Str. 15, 21079 Hamburg, Germany.
Printing inks, composed of binders, pigments, and additives, are essential components in plastic packaging but complicate recycling due to plastic contamination and degradation. While polyolefins are resistant to hydrolytic degradation, moisture generated from upstream cleaning processes, which is often ignored, can accelerate the degradation of ink binders, affecting the recyclate quality. This study has examined the impact of 3 wt.
View Article and Find Full Text PDFSynergistic Long-Term Protection of Inorganic and Polymer Hybrid Coatings for Free-Dendrite Zinc Anodes.
Langmuir
November 2024
National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, P. R. China.
Constructing an artificial solid electrolyte interface protective layer on the surface of the zinc anode is an effective strategy for addressing dendrite growth, passivation, and the hydrogen evolution reaction in aqueous zinc-ion batteries. This study introduces a robust interlayer composed of a polyvinyl butyral matrix decorated with SiO particles (PS). Adsorption of water by Si-OH on the surface of SiO leads to excellent hydrophilicity and accelerates the desolvation of ions.
View Article and Find Full Text PDFPolyvinyl Butyral Solid Electrolyte Film and Its Electrochromic Laminated Safety Glass.
ACS Appl Mater Interfaces
November 2024
School of Chemical Engineering, Advanced Research Institute of Materials Science, Changchun University of Technology, Changchun 130000, China.
In recent years, the application of electrochromic laminated safety glass has attracted more and more attention, relying on polyvinyl butyral (PVB) solid electrolyte film. Herein, the ionic conductivity (σ) of the PVB film has been improved by a cross-linked structure and blended with LiClO, which can reach as high as 1.78 × 10 S cm at room temperature.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!