Low-Frequency, Open, Sound-Insulation Barrier by Two Oppositely Oriented Helmholtz Resonators.

Micromachines (Basel)

Key Laboratory of Modern Acoustics, National Laboratory of Solid State Microstructures, Department of Physics and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China.

Published: December 2021

AI Article Synopsis

  • A low-frequency, open sound-insulation barrier was created using a single layer of periodic units made from Helmholtz resonators, designed to provide effective sound insulation and ventilation.
  • The barrier demonstrated a significant reduction in sound transmission, achieving a minimum transmittance of 0.06 at approximately 121.5 Hz due to sound reflections and absorptions.
  • The introduction of a multilayer version enhanced performance, resulting in broadband sound insulation and making it an effective solution for architectural acoustics and noise control.

Article Abstract

In this work, a low-frequency, open, sound-insulation barrier, composed of a single layer of periodic subwavelength units (with a thickness of λ/28), is demonstrated both numerically and experimentally. Each unit was constructed using two identical, oppositely oriented Helmholtz resonators, which were composed of a central square cavity surrounded by a coiled channel. In the design of the open barrier, the distance between two adjacent units was twice the width of the unit, showing high-performance ventilation, and low-frequency sound insulation. A minimum transmittance of 0.06 could be observed around 121.5 Hz, which arose from both sound reflections and absorptions, created by the coupling of symmetric and asymmetric eigenmodes of the unit, and the absorbed sound energy propagating into the central cavity was greatly reduced by the viscous loss in the channel. Additionally, by introducing a multilayer open barrier, a broadband sound insulation was obtained, and the fractional bandwidth could reach approximately 0.19 with four layers. Finally, the application of the multilayer open barrier in designing a ventilated room was further discussed, and the results presented an omnidirectional, broadband, sound-insulation effect. The proposed open, sound-insulation barrier with the advantages of ultrathin thickness; omnidirectional, low-frequency sound insulation; broad bandwidth; and high-performance ventilation has great potential in architectural acoustics and noise control.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8706626PMC
http://dx.doi.org/10.3390/mi12121544DOI Listing

Publication Analysis

Top Keywords

open sound-insulation
12
sound-insulation barrier
12
open barrier
12
sound insulation
12
low-frequency open
8
oppositely oriented
8
oriented helmholtz
8
helmholtz resonators
8
high-performance ventilation
8
low-frequency sound
8

Similar Publications

A common application for intraoral scanners is the digitization of the morphology of teeth and palatal rugae. Palatal scans are most commonly required to fabricate complete dentures and immediate transitional dentures and serve as a reference point for assessing orthodontic results. However, they are also frequently included by accident, even though the main purpose of intraoral scanning is to reconstruct dentition using computer-aided manufacturing (CAM).

View Article and Find Full Text PDF

In a Finnish-Swedish consortium project, a large amount of sound insulation tests was conducted for several intermediate floors in laboratory conditions to serve various scientific research questions. The dataset contains 30 wooden and 8 concrete constructions which are commonly used between apartments in multistorey buildings. Impact sound insulation was determined according to ISO 10140-3 standard using both tapping machine and rubber ball as standard sound sources.

View Article and Find Full Text PDF
Article Synopsis
  • A new acoustic metamaterial design featuring air-permeable multiple-parallel-connection folding chambers was developed to balance sound insulation and ventilation.
  • The design includes chambers with square panels that have multiple openings, allowing for thickness and plane extension, and its effectiveness was tested using acoustic finite element simulations.
  • With specific parameters, the material achieved significant sound transmission loss, reaching up to 33.6 dB at certain low frequencies and an air passage open area of 55.18%, indicating both good sound insulation and ventilation capabilities.
View Article and Find Full Text PDF

The design of sound-insulation schemes requires the development of new materials and structures while also paying attention to their laying order. If the sound-insulation performance of the whole structure can be improved by simply changing the laying order of materials or structures, it will bring great advantages to the implementation of the scheme and cost control. This paper studies this problem.

View Article and Find Full Text PDF

Ceramic-based nanofiber materials have attracted attention due to their high-temperature resistance, oxidation resistance, chemical stability, and excellent mechanical performance, such as flexibility, tensile, and compression, which endow them with promising application prospects for filtration, water treatment, sound insulation, thermal insulation, etc. According to the above advantages, we, therefore, reviewed the ceramic-based nanofiber materials from the perspectives of components, microstructure, and applications to provide a systematical introduction to ceramic-based nanofiber materials as so-called blankets or aerogels, as well as their applications for thermal insulation, catalysis, and water treatment. We hope that this review will provide some necessary suggestions for further research on ceramic-based nanomaterials.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!