The measurement of cutting force is an effective method for machining condition monitoring in intelligent manufacturing. Titanium nitride films and silicon nitride films were prepared on 304 stainless steel substrates by DC-reactive magnetron sputtering and plasma-enhanced chemical vapor deposition (PECVD). The effects of substrate negative bias and nitrogen flow on the surface microstructures of TiN film were investigated. The smoothness of the film is optimal when the bias voltage is -60 V. X-ray diffraction (XRD) analysis was performed on the samples with the optimal smoothness, and it was found that when the nitrogen flow rate was higher than 2 sccm, the titanium nitride film had a mixed phase of TiN(111) and (200). It is further revealed that the change of peak intensity of TiN(200) can be enhanced by nitrogen flow. Through atomic force microscopy (AFM), it is found that the stronger the intensity of the TiN (200) peak, the smoother the surface of the film is. Finally, the effect of different film thicknesses on the hardness and toughness of the TiN/SiN film system was studied by nanoindentation experiments. The nanohardness (H) of the TiN/SiN film can reach 39.2 GPa, the elastic modulus (E) is 480.4 GPa, the optimal toughness value (H/E) is 0.261 GPa, and the sample has good insulation performance. Linear fitting of the film's toughness to nanohardness shows that TiN/SiN films with higher hardness usually have a higher H/E ratio.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8703434 | PMC |
| http://dx.doi.org/10.3390/mi12121476 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Prediction of microbial crude protein flow from the rumen of dairy cattle by means of dietary characteristics - a meta-analysis.
Arch Anim Nutr
January 2025
Institute of Animal Science, University of Bonn, Bonn, Germany.
Protein supply to ruminants relies mainly on the flow of microbial crude protein (MCP) from the rumen, which is commonly assumed to primarily depend on energy supply. This study evaluated this assumption with recent data and tested if ruminally fermented organic matter (FOM) was a better predictor of MCP flow than total-tract digestible organic matter (DOM) and if more variables could improve the prediction of MCP flow. A previously published data set was extended by additional studies resulting in a data set of 139 studies including 407 treatment means, typical to Central European rations.
View Article and Find Full Text PDFExperimental investigation of bluff body geometry effects on nitrogen oxides emissions from Cambridge stratified burner.
Sci Rep
January 2025
Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran.
In this study, a series of experiments are done to analyze the effect of bluff body geometry on the NO reduction of a natural gas-air stratified swirl burner. The stratified burner of Cambridge University is chosen to study the mentioned geometrical effect, and the geometry modification of bluff body is used as a simple method for NO reduction, which can be easily applied to the systems using these burners, including gas turbines. The bluff body geometrical change to an annular bluff body is inspired by the fact that the areas in which the edge of the bluff body is in contact with the unburned flow have lower temperatures, which can drastically affect combustion parameters, especially emissions.
View Article and Find Full Text PDFBiofloc technology significantly reshapes water microbiome and improves survival rates in Japanese eel ().
Microbiol Spectr
January 2025
Department of Biology and Chemistry, Changwon National University, Changwon, South Korea.
Unlabelled: Global aquaculture production faces the challenge of biologically cycling nitrogenous waste. Biofloc technology (BFT) systems offer the potential to reduce water consumption and eliminate waste products by using beneficial microorganisms to convert waste into usable nutrients or non-toxic molecules. Unlike flow-through systems (FTS), which depend on continuous water exchange and result in higher operational costs as well as limited microbiome stability, BFT operates without the need for constant water exchange.
View Article and Find Full Text PDFAmmonia distribution characteristics at the selective catalytic reduction reactor inlet with linear partitioning.
iScience
January 2025
Electrical Engineering College, Guizhou University, Guiyang 550025, China.
Analyzing the uniformity of ammonia distribution at the inlet of selective catalytic reduction reactors is crucial for enhancing denitrification efficiency. To minimize ammonia slip while ensuring effective denitrification, this study examines ammonia flow characteristics in the SCR system under various zoning schemes. In scheme I, zones A1, A2, A3, and A4 predominantly influence the left, center, center-right, and far-right regions of the reactor inlet.
View Article and Find Full Text PDFImpact of environmental exposures on exhaled breath and lung function: NELA Birth Cohort.
ERJ Open Res
January 2025
Department of Biochemistry and Molecular Biology B and Immunology, University of Murcia, Murcia, Spain.
Introduction: Exposure to environmental factors ( air pollution and second-hand tobacco smoke) have been associated with impaired lung function. However, the impact of environmental factors on lung health is usually evaluated separately and not with an exposomic framework. In this regard, breath analysis could be a noninvasive tool for biomonitoring of global human environmental exposure.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!