In the present study, the oxidative desulfurization (ODS) of Sn 650 base oil with total sulfur content of 10,000 ppmw has been investigated experimentally. The response surface methodology (RSM) considering Box-Behnken design (BBD) was applied to examine the impacts of the oxidation temperature (30-70˚C), hydrogen peroxide to sulfur molar ratio (2-8), and formic acid to sulfur molar ratio (20-60) on the sulfur removal. In the next step, the appropriate values of the independent variables such as stirrer speed (750-1250 rpm), reaction time (60-180 min), and the number of extraction stages (1-4) were determined based on the optimal result obtained from the BBD. The best performance of the ODS process was found at a reaction temperature of 58˚C, an oxidant to sulfur molar ratio of 7.35, a formic acid to sulfur molar ratio of 58.5, a reaction time of 150 min, and a stirrer speed of 1250 rpm for the oxidation reaction. The achieved sulfur removal after oxidation followed by liquid-liquid extraction was 32 %, and 60 % for one extraction and three extraction stages, respectively. The changes in the base oil specifications after the ODS treatment were also investigated.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8617150PMC
http://dx.doi.org/10.1007/s40201-021-00747-1DOI Listing

Publication Analysis

Top Keywords

sulfur molar
16
molar ratio
16
base oil
12
oxidative desulfurization
8
formic acid
8
acid sulfur
8
sulfur removal
8
stirrer speed
8
reaction time
8
extraction stages
8

Similar Publications

Introduction: (referred to Tianma in Chinese), the dried tuber of Bl. (Orchidaceae), is utilized as a medicine-food homology product. Sulfur fumigation is commonly employed in the processing of (GR).

View Article and Find Full Text PDF

Key flocculated-species is the pivotal factor influencing the effectiveness of flocculants, which in turn directly determines the performance of mainstream wastewater treatment processes. Recovery of titanium-coagulated sludge and high-efficiency of titanium-coagulation have made titanium-coagulants an attractive hot point. However, the separation of key titanium-based flocculated-species remains a critical bottleneck limiting the advancement of titanium-based flocculant chemistry in water treatment.

View Article and Find Full Text PDF

The valorization of agro-industrial by-products/co-products represents a sustainable pathway to produce high-value biomaterials. Feather meal is an agro-industrial co-product derived from clean and undecomposed poultry feathers processed under high heat and pressure that offers an economically viable and scalable alternative for keratin extraction compared to native feathers. This study explores the recovery of keratin from feather meal through an optimized alkaline hydrolysis process, achieving a yield of 20 wt.

View Article and Find Full Text PDF

Autoclave leaching of sulfide concentrates may produce various ferric secondary phases, depending on the arsenic content and temperature. Silver is converted to argentojarosite, from which it is not recoverable by standard cyanidation methods. To increase silver recovery, it is necessary to reduce the argentojarosite formation during autoclave leaching.

View Article and Find Full Text PDF

Sulfide addition accelerates anammox sludge granulation and promotes microbial cooperation.

Water Res

January 2025

State Key Laboratory of Pollution Control and Resources Reuse, Shanghai Institute of Pollution Control and Ecological Security, College of Environmental Science and Engineering, Tongji University, Siping Road, Shanghai 200092, PR China.

The granular anaerobic ammonium oxidation (anammox) system has attractive advantages in tolerance to environmental-stress and enhancement of nitrogen removal capacity. Sulfide addition can improve nitrogen removals in anammox systems via inducing sulfur denitrification, yet its function in the improvement of the property of anammox granular sludge remains unclear. Herein, we investigated the variations in the morphological and microbial properties of the anammox sludge response to different sulfide concentrations (NaS: 10-100 mg/L) through a long-term experiment.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!