Electrochemical impedance spectroscopy (EIS) is a useful approach for modeling the equivalent circuit of biosensors such as field-effect transistor (FET)-based biosensors. During the process of sensor development, laboratory potentiostats are mainly used to realize the EIS. However, those devices are normally not applicable for real use-cases outside the laboratory, so miniaturized and optimized instrumentations are needed. Various integrated circuits (IC) are available that provide EIS, but these make developed systems highly dependent on semiconductor manufacturers, including component availability. In addition, these generally do not meet the instrumentation requirements for FET-based biosensors, thus external circuitry is necessary as well. In this work, an instrumentation is presented that performs EIS between 10 Hz and 100 kHz for FET-based biosensors. The instrumentation includes the generation of the excitation signal, the configuration of the semiconductor and the readout circuit. The readout circuit consists of a transimpedance amplifier with automatic gain adjustment, filter stages, a magnitude and a phase detection circuit. Since magnitude and phase are converted to a DC signal, digitization of the results is trivial without further signal processing steps, minimizing the computational load on the microcontroller. The transmission behavior of the magnitude and phase measurement circuits shows a high linearity for sinusoidal signals. Furthermore, the overall system was tested with resistors, whereby the magnitude measurement error (1.7%) and the phase shift error (1.6°) were determined within the working range of the instrumentation. The functionality of the instrumentation is demonstrated using pH-sensitive field-effect transistors (ISFET) in various solutions.Clinical relevance- Based on the electrochemical impedance spectroscopy of FET-based biosensors such as ImmunoFETs, new point-of-care testing (POCT) devices can be developed that e.g. quantitatively detect the concentration of biomarkers with very low detection limits in body fluids. The instrumentation presented in this work can be part of new generation of diagnostic tools featuring innovative sensor technologies.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1109/EMBC46164.2021.9630764 | DOI Listing |
Lab Chip
January 2025
State Key Laboratory of Precision Measuring Technology and Instruments, School of Precision Instruments and Optoelectronics Engineering, Tianjin University, Tianjin 300072, China.
Nanoparticles have become widely used materials in various fields, yet their mechanism of action at the cellular level after entering the human body remains unclear. Accurately observing the effect of nanosize dimensions on particle internalization and toxicity in cells is crucial, particularly under the conditions of biological activity. With the aim of helping to study the interactions between nanoparticles of varying sizes and active cell membranes, we propose a flexible biosensor system based on a field effect transistor (FET).
View Article and Find Full Text PDFBiosens Bioelectron
March 2025
Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian, 116024, China.
Stable and low-cost field-effect transistor (FET)-based biosensors are vital for the on-site detection of toxic pollutants in environmental monitoring applications. In this study, a tunable aptamer-MXene sensing interface was constructed to develop renewable FET biosensors. This was achieved through the reversible disulfide bond (-S-S-) reaction between the SH-TiCT film and thiolated aptamer.
View Article and Find Full Text PDFTalanta
December 2024
Nextgen Adaptive Systems Group, Department of Electrical Engineering, National Institute of Technology Patna, Bihar, India. Electronic address:
This study explores a quick, low-cost method to detect Alzheimer's disease (AD) by evaluating the accomplishment of a Gate-Stack (GS) Field Effect Transistor (FET). We investigate Single-Metal (SM), Dual-Metal (DM), and Tri-Metal Double Gate (DG) configurations, where cavities have been created by etching the oxide layer underneath the gate to immobilize grey matter samples collected through Solid-phase microextraction (SPME). Healthy and AD-affected grey matter have different dielectric characteristics at high frequencies.
View Article and Find Full Text PDFACS Nano
December 2024
Hunan Institute of Advanced Sensing and Information Technology, Hunan Provincial Key Laboratory of Smart Carbon Materials and Advanced Sensing, Xiangtan University, Hunan 411105, China.
Field-effect transistor (FET) sensors are attractive for the label-free detection of target biomolecules, offering ultrahigh sensitivity and a rapid response. However, conventional methods for modifying biomolecular probes on sensors often involve intricate and time-consuming procedures that require specialized training. Herein, we propose a simple and versatile approach to functionalize floating-gate (FG) FET sensors by exploiting the strong binding ability of polyvalent interactions and the three-dimensional structure of densely functionalized spherical nucleic acids (SNAs).
View Article and Find Full Text PDFNanoscale
November 2024
School of Mechanical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, China.
Field-effect transistor (FET)-based biosensors not only enable label-free detection by measuring the intrinsic charges of biomolecules, but also offer advantages such as high sensitivity, rapid response, and ease of integration. This enables them to play a significant role in disease diagnosis, point-of-care detection, and drug screening, among other applications. However, when FET sensors detect biomolecules in physiological solutions (such as whole blood, serum, ), the charged molecules will be surrounded by oppositely charged ions in the solution.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!