Mutagenicity of Wood Extracts and Their Ability to Improve Carbohydrate Yield for Kraft Cooking Eucalyptus Wood.

Molecules

Faculty of Life and Environmental Sciences, University of Tsukuba, 1-1-1 Tennodai, Tsukuba 305-8572, Ibaraki, Japan.

Published: November 2021

Considering the toxicity of the impurities of synthesized anthraquinone, this study clarified new catalytic compounds for kraft cooking with improved carbohydrate yield and delignification and less mutagenicity, which are important for ensuring the safety of paper products in contact with food. The 2-methylanthraquinone contents of teak () woods were 0.18-0.21%. Acetone extracts containing 2-methylanthraquinone from Myanmar and Indonesia teak woods as additives improved lignin removal during kraft cooking of eucalyptus wood, which resulted in kappa numbers that were 2.2-6.0 points lower than the absence of additive. Myanmar extracts and 2-methylanthraquinone improved carbohydrate yield in pulps with 1.7-2.2% yield gains. Indonesia extracts contained more deoxylapachol and its isomer than 2-methylanthraquinone. The residual content of 2-methylanthraquinone in the kraft pulp was trace. Although Ames tests showed that the Indonesia and Myanmar extracts were mutagenic to , 2-methylanthraquinone was not. The kraft pulp obtained with the additives should be safe for food-packaging applications, and the addition of 0.03% 2-methylanthraquinone to kraft cooking saves forest resources and fossil energy in industries requiring increased pulp yield.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8659162PMC
http://dx.doi.org/10.3390/molecules26237171DOI Listing

Publication Analysis

Top Keywords

kraft cooking
16
carbohydrate yield
12
2-methylanthraquinone kraft
12
cooking eucalyptus
8
eucalyptus wood
8
improved carbohydrate
8
teak woods
8
extracts 2-methylanthraquinone
8
myanmar extracts
8
kraft pulp
8

Similar Publications

Chemically Pretreated Densification of Juniper Wood for Potential Use in Osteosynthesis Bone Implants.

J Funct Biomater

September 2024

Department of Morphology, Institute of Anatomy and Anthropology, Riga Stradins University, Dzirciema Street 16, LV-1007 Riga, Latvia.

The aim of the study was to perform treatment of juniper wood to obtain wood material with a density and mechanical properties comparable to bone, thus producing a potential material for use in osteosynthesis bone implants. In the first step, partial delignification of wood sample was obtained by Kraft cooking. The second step was extraction with ethanol, ethanol-water mixture, saline, and water to prevent the release of soluble compounds and increase biocompatibility.

View Article and Find Full Text PDF

Flax (Linum usitatissimum) is a bast fiber plant known for its long fibers, making it an excellent source of pulp for paper production. In Ethiopia, flax is primarily cultivated for oil, with the residual straw utilized for papermaking. This study focuses on pulping flax straw using the Kraft process and investigates its chemical composition, proximate analysis, and morphological properties.

View Article and Find Full Text PDF

Lignin is a promising resource for the sustainable production of platform chemicals and biofuels. The paper industry produces large quantities of lignin every year, mostly dissolved in a black liquor. With the help of hydrothermal liquefaction, black liquor can be used directly as a feedstock to depolymerize the lignin to desired products.

View Article and Find Full Text PDF

The research conducted on kraft cooking of for different chip sizes is often not representative for the industrial process since the chip size fractions were made of high-quality wood without impurities. We evaluated the effects and the potential of cooking non ideal spruce chip fractions after industrial chipping and screening. The chips were classified according to SCAN 40:01, and the respective fractions were cooked under the identical conditions to mimic the effect of a joint cooking in the industrial digester.

View Article and Find Full Text PDF

Xylanase treatment of eucalypt kraft pulps: effect of carryover.

Appl Microbiol Biotechnol

February 2024

CERES, Department of Chemical Engineering, University of Coimbra, 3030-790, Coimbra, Portugal.

The influence of pulp carryover on the efficiency of the xylanase (X) treatment of industrial unbleached and oxygen-delignified eucalypt kraft pulps (A1 and A2 pulps, with kappa number (KN) values of 16 and 10, respectively), collected at the same pulp mill, was studied regarding the consumption of bleaching chemicals and pulp bleachability. Another non-oxygen-delignified eucalyptus kraft pulp of KN 13 was received after the extended cooking from a different pulp mill (pulp B). The assays were performed with both lab-washed (carryover-free) and unwashed (carryover-rich) pulps.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!