Wood-plastic composites (WPC) with good mechanical and physical properties are desirable products for manufacturers and customers, and interfacial bond strength is one of the most critical factors affecting WPC performance. To verify that a higher interfacial bond strength between wood and thermoplastics improves WPC performance, wood veneer-thermoplastic composites (VPC) and oriented strand-thermoplastic composites (OSPC) were fabricated using hot pressing. The effects of the coupling agent (KH550 or MDI) and the thermoplastic (LDPE, HDPE, PP, or PVC) on the interfacial bond strength of VPC, and the mechanical and physical properties of OSPC, were investigated. The results showed that coupling agents KH550 and MDI improved the interfacial bond strength between wood and thermoplastics under dry conditions. MDI was better than KH550 at improving the interfacial bond strength and the mechanical properties of OSPC. Better interfacial bonding between plastic and wood improved the OSPC performance. The OSPC fabricated using PVC film as the thermoplastic and MDI as the coupling agent displayed the highest mechanical properties, with a modulus of rupture of 91.9 MPa, a modulus of elasticity of 10.9 GPa, and a thickness swelling of 2.4%. PVC and MDI are recommended to fabricate WPCs with desirable performance for general applications.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8659561 | PMC |
| http://dx.doi.org/10.3390/polym13234260 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Revisiting Dipole-Induced Fluorinated-Anion Decomposition Reaction for Promoting a LiF-Rich Interphase in Lithium-Metal Batteries.
Nanomicro Lett
January 2025
Henan Institutes of Advanced Technology, Zhengzhou University, Zhengzhou, 450003, People's Republic of China.
Building anion-derived solid electrolyte interphase (SEI) with enriched LiF is considered the most promising strategy to address inferior safety features and poor cyclability of lithium-metal batteries (LMBs). Herein, we discover that, instead of direct electron transfer from surface polar groups to bis(trifluoromethanesulfonyl)imide (TFSI) for inducing a LiF-rich SEI, the dipole-induced fluorinated-anion decomposition reaction begins with the adsorption of Li ions and is highly dependent on their mobility on the polar surface. To demonstrate this, a single-layer graphdiyne on MXene (sGDY@MXene) heterostructure has been successfully fabricated and integrated into polypropylene separators.
View Article and Find Full Text PDFReinforcing ion diffusion and controlling microcrack of nickel-rich cobalt-free single-crystalline cathodes via interfacial protection and bulk optimization.
J Colloid Interface Sci
January 2025
School of Chemistry and Chemical Engineering, University of South China, Hengyang 421001 China. Electronic address:
Nickel-rich cobalt-free layered oxide cathode with Ni contents no fewer than 90 % has received extensive attention in the field of lithium-ion batteries due to its excellent specific capacity and low cost, but serious capacity degeneration induced by structural deterioration and interfacial instability greatly hamper their further development. Herein, the Sb-modified LiNiMnO materials from the interface to interior have been designed and fabricated to overcome the above issues. On the one hand, the introduction of Sb-ion in interior of grains can generate Sb-O chemical bond with high dissociation energy, which contributes to reinforce the chemical and structural stability.
View Article and Find Full Text PDFIntegrating Protein Language Model and Molecular Dynamics Simulations to Discover Antibiofouling Peptides.
Langmuir
January 2025
Department of Chemical and Materials Engineering, University of Kentucky, Lexington, Kentucky 40506, United States.
Antibiofouling peptide materials prevent the nonspecific adsorption of proteins on devices, enabling them to perform their designed functions as desired in complex biological environments. Due to their importance, research on antibiofouling peptide materials has been one of the central subjects of interfacial engineering. However, only a few antibiofouling peptide sequences have been developed.
View Article and Find Full Text PDFThermal Transport through CTAB- and MTAB-Functionalized Gold Interfaces Using Molecular Dynamics Simulations.
J Chem Inf Model
January 2025
251 Nieuwland Science Hall, Department of Chemistry and Biochemistry, University of Notre Dame, Notre Dame, Indiana 46556, United States.
Thermal transport coefficients, notably the interfacial thermal conductance, were determined in planar and spherical gold interfaces functionalized with CTAB (cetyltrimethylammonium bromide) or MTAB (16-mercapto-hexadecyl-trimethylammonium bromide) using reverse nonequilibrium molecular dynamics (RNEMD) methods. The systems of interest included (111), (110), and (100) planar facets as well as nanospheres ( = 10 Å). The effect of metal polarizability was investigated through the implementation of the density-readjusted embedded atom model (DR-EAM), a polarizable metal potential.
View Article and Find Full Text PDFEnhanced Electrocatalytic Hydrogen Peroxide Production via a CuWO/WO Heterojunction with High Selectivity and Stability.
ACS Appl Mater Interfaces
January 2025
Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen 518055, China.
The electrocatalytic conversion of oxygen to hydrogen peroxide offers a promising pathway for sustainable energy production. However, the development of catalysts that are highly active, stable, and cost-effective for hydrogen peroxide synthesis remains a significant challenge. In this study, a novel polyacid-based metal-organic coordination compound (Cu-PW) was synthesized using a hydrothermal approach.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!