The operating theater is recognized to involve a high frequency of occupational blood and body fluid contacts. This study aimed to visualize the production of blood and body fluid airborne particles by surgical procedures and to investigate risks of microbial contamination of the conjunctival membranes of surgical staff during orthopedic operations. Two physicians simulated total knee arthroplasty (TKA) and total hip arthroplasty (THA) in a bio-clean theater using model bones. The generation and behaviors of airborne particles were filmed using a fine particle visualization system, and numbers of airborne particles per 2.83 L of air were counted at the height of the operating and instrument tables. Each action was repeated five times, and particle counts were evaluated statistically. Numerous airborne particles were dispersed to higher and wider areas while "cutting bones in TKA" and "striking and driving the cup component on the pelvic bone in THA" compared to other surgical procedures. The highest particle counts were detected while "cutting bones in TKA" under unidirectional laminar air flow. These results provide a clearer image of the dispersion and distribution of airborne particles and identified higher-risk surgical procedures for microbial contamination of the conjunctival membranes. Surgical staff including surgeons, nurses, anesthesiologists, and visitors, should pay attention to and take measures against occupational infection particularly in high-risk surgical situations.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8645645 | PMC |
http://dx.doi.org/10.3389/fsurg.2021.754785 | DOI Listing |
Infect Control Hosp Epidemiol
January 2025
Virology Department, AP-HP, Hôpital Saint-Louis, Paris, France.
Objective: Patients with chronic kidney disease suffer from immune dysfunction, increasing susceptibility to infections. The aim of the study was to investigate air contamination with respiratory viruses in a dialysis unit at a quaternary hospital using molecular detection techniques and to analyze airflow dynamics through computational fluid dynamics (CFD) simulations for a comprehensive assessment of air transmission risks.
Methods: We conducted dialysis unit air sampling using AerosolSense™ samplers.
Environ Pollut
January 2025
University of Southern California, Department of Civil and Environmental Engineering, Los Angeles, California, USA. Electronic address:
Airborne particulate matter (PM) in urban environments poses significant health risks by penetrating the respiratory system, with concern over lung-deposited surface area (LDSA) as an indicator of particle exposure. This study aimed to investigate the diurnal trends and sources of LDSA, particle number concentration (PNC), elemental carbon (EC), and organic carbon (OC) concentrations in Los Angeles across different seasons to provide a comprehensive understanding of the contributions from primary and secondary sources of ultrafine particles (UFPs). Hourly measurements of PNC and LDSA were conducted using the DiSCmini and Scanning Mobility Particle Sizer (SMPS), while OC and EC concentrations were measured using the Sunset Lab EC/OC Monitor.
View Article and Find Full Text PDFClin Oral Investig
January 2025
Epidemiology, Biostatistics and Prevention Institute, University of Zurich, Zurich, Switzerland.
Objectives: To compare the impact of intaglio surface treatments - airborne particle abrasion and hydrofluoric acid (HF) etching - of feldspar ceramic (FEL) crowns on the fracture load (FL) and to investigate the effects of abutment materials and artificial aging. The aim was to assess whether etching could be replaced by an alternative surface roughening method.
Materials And Methods: FEL crowns had their intaglio surfaces either abraded (25 µm AlO, 0.
Polymers (Basel)
December 2024
Faculty of Engineering, "Dunărea de Jos" University, 800008 Galati, Romania.
The wind turbine blades are exposed, during functioning, to the abrasive wear generated by the impact with air-borne sand particles. In this work, samples of a commercial wind turbine blade, made of a multi-layered composite material, are subjected to abrasive wear tests, using an air streamed wearing particles test rig. Following the analysis of the tests' results was found that the only protection against failure of the blade by abrasive damage is the surface layer.
View Article and Find Full Text PDFMicroorganisms
December 2024
Department of Environmental Science, University of Arizona, Tucson, AZ 85719, USA.
Resuspended particles from human activities can contribute to pathogen exposure via airborne fomite contamination in built environments. Studies investigating the dissemination of resuspended viruses are limited. The goal of this study was to explore viral dissemination after aerosolized resuspension via human activities on indoor flooring.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!