AI Article Synopsis
Article Abstract
The present research investigates the degradation rate of bioplastics under various composting conditions, including suboptimal ones. Lab-scale tests were carried out setting three variables: temperature (37°C-58°C), humidity (30%-60%) and duration of the thermophilic and the maturation phases (15-60 days). The composting tests were carried out following modified guideline ISO 20200:2015 and lasted for 60 days. Bioplastics in the synthetic waste matrix consisted of Mater-Bi film biobags and PLA rigid teaspoons. A kinetic study was performed, resulting in faster degradation rates for film bioplastics (first-order kinetics with = 0.0850-0.1663 d) than for rigid (0.0018-0.0136 d). Moreover, film bioplastics reached a complete degradation within the 60 days of the test. Concerning the rigid products, 90% degradation would be achieved in 2-3 years for mesophilic conditions. Finally, in the undersieve of 0.5 mm some microplastics were identified with the ImageJ software, mainly relatable to rigid (PLA) bioplastics. Overall, the results disclosed that the combination of mesophilic temperatures and absence of moistening slowed down both the degradation and the disintegration process of bioplastics.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1177/0734242X211063731 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A dual antioxidant and antimicrobial bioplastic film endowed with amine-branched poly(lactic acid): Bioactive packaging for electron beam sterilization and food shelf-life extension.
Int J Biol Macromol
December 2024
Center of Radiation Processing for Polymer Modification and Nanotechnology (CRPN), Department of Materials Science, Faculty of Science, Kasetsart University, 50 Ngam Wong Wan Rd., Ladyao, Chatuchak, Bangkok 10900, Thailand; Department of Materials Science, Faculty of Science, Kasetsart University, 50 Ngam Wong Wan Rd., Ladyao, Chatuchak, Bangkok 10900, Thailand. Electronic address:
Cyclic amine-multibranched poly(lactic acid) (mPLA) was prepared as a dual antioxidant and antimicrobial toward PLA active packaging for food shelf-life extension in a case study of bread. The mPLA was coupled with piperidine (PPR) containing a heterocyclic amine derivative, which is a nature-rich bioactive function. The functions of mPLA-PPR enhancing the PLA film performance were studied in comparison with PPR, mPLA and Tinuvin® 770.
View Article and Find Full Text PDFMucoadhesive Enhancement of Gelatine by Tannic Acid Crosslinking for Buccal Application.
Biopolymers
January 2025
Faculty of Pharmacy, Universiti Teknologi MARA, Selangor Branch, Puncak Alam Campus, Puncak Alam, Selangor, Malaysia.
This study aims to evaluate the impact of formulation parameters on tannic acid-crosslinked gelatine (GelTA) films, intended as a mucoadhesive matrix for extended buccal drug delivery. GelTA films were prepared using the solvent evaporation technique and screened based on their mucoadhesive and dissolution characteristics. The formulation variables included the source of gelatine (bovine and fish), tannic acid concentration, pH of the film-forming solutions, and the type and concentration of plasticisers.
View Article and Find Full Text PDFUse of alfalfa cellulose for formulation of strong, biodegradable film to extend the shelf life of strawberries.
Int J Biol Macromol
December 2024
Department of Dairy and Food Science, South Dakota State University, Brookings, SD 57007, USA. Electronic address:
Plastic packaging has increased concerns about human health and the ecosystem due to non-biodegradability. Several biopolymers, such as cellulose, starch, and proteins, are being explored, and cellulosic residue from agricultural biomass is suitable to overcome this predicament. Herein, cellulosic residue fibers (ACR) extracted from alfalfa were used to prepare biodegradable films by solubilizing them in ZnCl solution and crosslinking the chains with calcium ions (Ca) and sorbitol.
View Article and Find Full Text PDFSilk-polyurethane composite based flexible electrochemical biosensing platform for pathogen detection.
Biosens Bioelectron
December 2024
Department of Electrical Engineering, Indian Institute of Technology, Hyderabad, India, 502284. Electronic address:
The upcoming era of flexible and wearable electronics necessitates the development of low-cost, flexible, biocompatible substrates amenable to the fabrication of active devices such as electronic devices, sensors and transducers. While natural biopolymers such as Silk are robust and biocompatible, long-term flexibility is a concern due to the inherent brittle nature of soft Silk thin films. This work elucidates the preparation and characterization of Silk-polyurethane (Silk-PU) composite film that provides long-duration flexibility.
View Article and Find Full Text PDFCharacterization of HPMC and PEG 400 Mucoadhesive Film Loaded with Retinyl Palmitate and Ketorolac for Intravaginal Administration.
Int J Mol Sci
November 2024
Departamento de Física y Matemáticas, Instituto de Ingeniería y Tecnología, Universidad Autónoma de Ciudad Juárez, Ciudad Juárez 32320, Mexico.
Intravaginal drug administration offers several advantages over other routes, primarily bypassing the initial stages of metabolism. Additionally, this route has demonstrated both local and systemic effects. Mucoadhesive polymeric systems can be utilized to prevent dose loss due to the mucous barriers and the formation of wet cavities.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!