Investigating the metal contamination status from recycling e-waste sites from Dakar, Senegal.

Environ Sci Pollut Res Int

Institut Des Sciences Analytiques, ISA UMR 5280, CNRS, Université Claude Bernard Lyon1, Université de Lyon, Lyon, France.

Published: April 2022

In Senegal, processes employed for recycling e-wastes result in release of so-called heavy metals in the environment. In this study, the metal distribution and concentrations of soils collected from four e-waste recycling areas located in the Dakar area are presented. Measurements are performed using portable X-ray fluorescence and laser-induced breakdown spectroscopy (LIBS) to obtain a complete analysis of the soil, including major and trace elements (i.e., mg/kg). Levels of zinc, copper, manganese, and iron in soils are high but contrasted ranging from 66 mg/kg for Cu in Mbeubeuss landfill to more than 1000 mg/kg for Mn and 10,000 mg/kg for Zn. Lower values are obtained for chromium and lead (Cr = 207 mg/kg and Pb = 181 mg/kg). The most elevated average lead values (i.e., 2935 mg/kg and 1427 mg/kg) are obtained from the e-waste recycling sites located in the urban area of Dakar: Reubeuss and Pikine, respectively. Specific element fingerprints are obtained from each of the studied areas. To evaluate human exposure to the main metals, vegetables grown outside the large e-waste landfill were analyzed. The values obtained for Cr, Cu, Fe, Mn, Sr, and Zn are low, ranging from 0.11 to 9.66 mg/kg for chromium in turnip and iron in beetroots, respectively. The calculated health risk index remains below unit for all vegetables, which means no potential risk of vegetable consumption for human health. The data provided useful information to estimate contaminations and their origin. Therefore, in order to ensure food safety, continuous monitoring of the vegetables grown in the vicinity of recycling areas is needed.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s11356-021-17678-xDOI Listing

Publication Analysis

Top Keywords

e-waste recycling
8
recycling areas
8
vegetables grown
8
recycling
5
investigating metal
4
metal contamination
4
contamination status
4
status recycling
4
e-waste
4
recycling e-waste
4

Similar Publications

Challenges of E-Waste Dismantling in China.

Toxics

November 2024

School of Public Health, Zhejiang Chinese Medical University, 548 Binwen Road, Hangzhou 310053, China.

Electronic and electrical products have deeply permeated all aspects of life, bringing a lot of convenience to individuals. However, the generation of e-waste after their end-of-life has resulted in serious risks both to the ecological environment and human health due to a lack of scientific and effective recycling and treatments. As two major types of components in e-waste, heavy metals and plastics can not only directly enter the human body via inhalation, ingestion, and skin absorption, but also accumulate in the human body indirectly through the food chain.

View Article and Find Full Text PDF

E-waste, a global environmental concern, particularly affects developing nations due to the rise in informal recycling practices. This leads to contamination of environmental matrices, posing threats to both ecosystems and human health. To assess this issue, we monitored brominated flame retardants (BFRs) in 164 samples (soil) from 32 informal e-waste operational locations and 9 background locations across nine mega cities of Pakistan from September 2020 to December 2021.

View Article and Find Full Text PDF

Synthesis of Tin Oxide Nanoparticles from E-Waste for Photocatalytic Mixed-Dye Degradation under Sunlight.

ACS Omega

December 2024

Department of Chemistry, School of Advanced Sciences, Vellore Institute of Technology, Chennai Campus, Vandalur-Kelambakkam Road, Chennai, Tamil Nadu 600127, India.

Electronic waste (e-waste) has become a significant environmental concern worldwide due to the rapid advancement of technology and short product lifecycles. Waste-printed electronic boards (WPCBs) contain valuable metals and semiconductors; among them, tin can be recycled and repurposed for sustainable material production. This study presents a potential ecofriendly methodology for the recovery of tin from WPCBs in the form of tin oxide nanostructured powders.

View Article and Find Full Text PDF

The disposal of waste-printed circuit boards (WPCBs) poses significant environmental and health risks, as they are a major component of e-waste containing hazardous materials. However, WPCBs also contain valuable metallic elements, making them important resources for recycling. To address the dual challenge of hazardous waste management and resource recovery, sustainable approaches for metal extraction from WPCBs are imperative.

View Article and Find Full Text PDF

Recycling e-waste into gold-loaded covalent organic framework catalysts for terminal alkyne carboxylation.

Nat Commun

December 2024

Department of Food Science, College of Agricultural and Life Sciences, Cornell University, Stocking Hall, Ithaca, NY, USA.

The rising demand for gold requires innovative methods for its recovery from e-waste. Here we present the synthesis of two tetrazine-based vinyl-linked covalent organic frameworks: TTF-COF and TPE-COF that adsorb gold ions and nanoparticles and catalyze the carboxylation of terminal alkynes. These covalent organic frameworks have low band gaps and high photocurrent responses.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!