Multicomponent behavioral interventions developed using the multiphase optimization strategy (MOST) framework offer important advantages over alternative intervention development models by focusing on outcomes within constraints relevant for effective dissemination. MOST consists of three phases: preparation, optimization, and evaluation. The preparation phase is critical to establishing the foundation for the optimization and evaluation phases; thus, detailed reporting is critical to enhancing rigor and reproducibility. A systematic review of published research using the MOST framework was conducted. A structured framework was used to describe and summarize the use of MOST terminology (i.e., preparation phase and optimization objective) and the presentation of preparation work, the conceptual model, and the optimization. Fifty-eight articles were reviewed and the majority focused on either describing the methodology or presenting results of an optimization trial (n = 38, 66%). Although almost all articles identified intervention components (96%), there was considerable variability in the degree to which authors fully described other elements of MOST. In particular, there was less consistency in use of MOST terminology. Reporting on the MOST preparation phase is varied, and there is a need for increased focus on explicit articulation of key design elements and rationale of the preparation phase. The proposed checklist for reporting MOST studies would significantly advance the use of this emerging methodology and improve implementation and dissemination of MOST. Accurate reporting is essential to reproducibility and rigor of scientific trials as it ensures future research fully understands not only the methodology, but the rationale for intervention and optimization decisions.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1093/tbm/ibab146 | DOI Listing |
Membranes (Basel)
December 2024
Unit of Chemical Technologies, Technology Centre of Catalonia, Eurecat, 43007 Tarragona, Spain.
The urgent need for sustainable, low-emission energy solutions has positioned proton exchange membrane fuel cells (PEMFCs) as a promising technology in clean energy conversion. Polysulfone (PSF) membranes with incorporated ionic liquid (IL) and hydrophobic polydimethylsiloxane-functionalized silica (SiO-PDMS) were developed and characterized for their potential application in PEMFCs. Using a phase inversion method, membranes with various combinations of PSFs, SiO-PDMS, and 1-butyl-3-methylimidazolium triflate (BMI.
View Article and Find Full Text PDFMembranes (Basel)
December 2024
Department of Medical Engineering, Upper Austria University of Applied Sciences, 4020 Linz, Austria.
The viscoelastic properties of biological membranes are crucial in controlling cellular functions and are determined primarily by the lipids' composition and structure. This work studies these properties by varying the structure of the constituting lipids in order to influence their interaction with high-density lipoprotein (HDL) particles. Various fluorescence-based techniques were applied to study lipid domains, membrane order, and the overall lateral as well as the molecule-internal glycerol region mobility in HDL-membrane interactions (i.
View Article and Find Full Text PDFMembranes (Basel)
December 2024
Guangxi Key Laboratory of Information Materials, Guilin University of Electronic Technology, Guilin 541004, China.
Currently, the main limitations of Pd-coated Nb-TiFe dual-phase alloys include insufficient hydrogen permeability, susceptibility to hydrogen embrittlement (HE), and poor tolerance of HS poisoning. To address these issues, this study proposes a series of improvements. First, a novel NbTiFe alloy composed of a well-aligned Nb-TiFe eutectic was successfully prepared using directional solidification (DS) technology.
View Article and Find Full Text PDFNanomaterials (Basel)
December 2024
State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 800 Dong Chuan Road, Shanghai 200240, China.
Direct harvesting of abundant solar thermal energy within organic phase-change materials (PCMs) has emerged as a promising way to overcome the intermittency of renewable solar energy and pursue high-efficiency heating-related applications. Organic PCMs, however, generally suffer from several common shortcomings including melting-induced leakage, poor solar absorption, and low thermal conductivity. Compounding organic PCMs with single-component carbon materials faces the difficulty in achieving optimized comprehensive performance enhancement.
View Article and Find Full Text PDFNanomaterials (Basel)
December 2024
School of Flexible Electronics (Future Technologies), Institute of Advanced Materials (IAM), Nanjing Tech University (NanjingTech), 30 South Puzhu Road, Nanjing 211816, China.
Two-dimensional WSe nanosheets have received increasing attention due to their excellent optoelectronic properties. Solid precursors, such as WO and Se powders, have been extensively employed to grow WSe nanosheets by the chemical vapor deposition (CVD) method. However, the high melting point of WO results in heterogeneous nucleation sites and nonuniform growth of the WSe nanosheet.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!