Piezoelectric sensors array based damage imaging method as a high resolution source localization algorithm is becoming a promising method in structural health monitoring (SHM) technology. However, the environmental variations could affect the gain-phase of array signal. This paper experimentally evaluates the environmental effects on piezoelectric sensors array, and presents a compensated 2D-MUSIC based damage imaging method for composite structures. Firstly, detailed analysis and comparison discussion about the gain-phase difference of array signal when the environmental parameters change, and the gain-phase changes respect to the environmental parameters could be obtained. Secondly, array error matrix is structured and substituted into the steering vector of the original 2D-MUSIC algorithm to compensate. Finally, the compensated 2D-MUSIC algorithm is applied for estimating the initial estimates of damage. After substituting these initial estimates, the cost function is minimized by adaptive iterative calculating the reasonable location of the damage source. The experiments on an epoxy laminate plate demonstrate the validity and effectiveness of the proposed method.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8617824 | PMC |
| http://dx.doi.org/10.3390/ma14226742 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Development of a photoacoustic acquisition system and their proof-of-concept for hemoglobin detection.
Heliyon
January 2025
Center for MicroElectromechanical Systems (CMEMS), University of Minho, Guimarães, 4800-058, Portugal.
Recently, Organ-on-a-Chip (OoC) platforms have arisen as an increasingly relevant experimental tool for successfully replicating human physiology and disease. However, there is a lack of a standard technology to monitor the OoC parameters, especially in a non-invasive and label-free way. Photoacoustic (PA) systems can be considered an alternative and accurate assessment method for OoC platforms.
View Article and Find Full Text PDFRecent Advances in Next-Generation Textiles.
Adv Mater
January 2025
Innovation Center for Textile Science and Technology, College of Textiles, Donghua University, Shanghai, 201620, China.
Textiles have played a pivotal role in human development, evolving from basic fibers into sophisticated, multifunctional materials. Advances in material science, nanotechnology, and electronics have propelled next-generation textiles beyond traditional functionalities, unlocking innovative possibilities for diverse applications. Thermal management textiles incorporate ultralight, ultrathin insulating layers and adaptive cooling technologies, optimizing temperature regulation in dynamic and extreme environments.
View Article and Find Full Text PDFAdaptive fault tolerant control for cantilever thick plates with piezoelectric patches.
Sci Rep
January 2025
School of Mechanical Engineering, Shiraz University, Shiraz, Fars, 7193616548, Iran.
This paper presents a novel adaptive fault-tolerant control (AFTC) framework for systems with piezoelectric sensor patches, specifically targeting sensor faults and external disturbances. The proposed method ensures robust control of cantilever thick plates by integrating adaptive estimation to simultaneously handle sensor faults and system uncertainties, maintaining stability despite issues like drift, bias, loss of accuracy, and effectiveness. Unlike traditional approaches that address sensor faults individually, our method provides a comprehensive solution backed by Lyapunov-based stability analysis, demonstrating uniform ultimate boundedness under various fault conditions.
View Article and Find Full Text PDFBiosensing for rapid detection of MDR, XDR and PDR bacteria.
Clin Chim Acta
December 2024
Infectious Disease, School of Aerospace and Subaquatic Medicine, Infectious Diseases & Tropical Medicine Research Center, Iran. Electronic address:
Article Synopsis
- The rise of multidrug-resistant (MDR), extensively drug-resistant (XDR), and pandrug-resistant (PDR) bacteria is a major global health threat that complicates treating infections and raises health risks.
- This manuscript reviews various biosensor technologies for quickly identifying and measuring MDR and XDR bacteria, highlighting their principles, sensitivity, and real-world applications.
- The study also discusses the challenges of implementing these biosensing technologies in clinical environments and emphasizes the importance of innovative diagnostics in fighting antibiotic resistance and enhancing patient care.
Enhanced Acoustoelectric Energy Harvesting with TiCT MXene in an All-Fiber Nanogenerator.
ACS Appl Mater Interfaces
January 2025
Institute for Frontier Materials, Deakin University, Waurn Ponds, Victoria 3216, Australia.
Materials and devices that harvest acoustic energy can enable autonomous powering of microdevices and wireless sensors. However, traditional acoustic energy harvesters rely on brittle piezoceramics, which have restricted their use in wearable electronic devices. To address these limitations, this study involves the fabrication of acoustic harvesters using electrospinning of the piezoelectric polymer PVDF-TrFE onto fabric-based electrodes.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!