Raspberry snack, as a novel berry product, has rich favor and high crisp taste, where controllable texture quality is conducive to the palatability of the snack. Determinative factors of microwave puffing in microwave intensity and duration and key property of material in Young's modulus were introduced to investigate the formation of texture quality of berry snack under microwave puffing. The results indicate that the microwave intensity has negative correlation with Young's modulus of raspberry chips, which causes the more porosity inside under microwave puffing. Reasonable Young's modulus of raspberry chips enhances the interior porosity and exterior expansion volume of raspberry snack due to the water vapor wrapped other than escaped. The greater microwave intensity results in the higher volume expansion of raspberry chips, in which the great volume expansion from porous pores structure confers moderate hardness. In microwave puffing, the formation of hardness and crispness of raspberry snack depend on microwave puffing parameters, leading to high temperature and great dehydration rate in quick puffing duration, in addition to Young's modulus of raspberry chips, where high dehydration rate accelerates water removal inside raspberry chips to form a harder texture with decreasing springiness, whereas low dehydration rate leads to the gentle change of springiness. Raspberry snack with uniform internal pores and regular shape forming desirable texture may be achieved under the microwave intensity of 7.5 W/g and the puffing duration of 6 min. This study indicates that high-quality raspberry snack may be achieved via controlling heating rate in microwave puffing.

Download full-text PDF

Source
http://dx.doi.org/10.1111/jtxs.12646DOI Listing

Publication Analysis

Top Keywords

microwave puffing
28
raspberry snack
24
raspberry chips
20
microwave intensity
16
young's modulus
16
texture quality
12
modulus raspberry
12
dehydration rate
12
raspberry
11
microwave
11

Similar Publications

This study focused on persimmons and applied variable-temperature pressure-differential puffing drying to produce persimmon chips. The effects of puffing pressure, holding time, drying temperature, and duration on moisture content, crispness, and sensory scores were examined. The optimal parameters determined via response surface methodology were a pressure differential of 0.

View Article and Find Full Text PDF

To enhance the pore structure of green coffee beans (GCB) and detect the sorption capacity and extraction characteristics of flavor compounds before roasting, this study employed several methods: hot air drying (HD), freeze-drying (FD), 3-levels short-time heating with puffing (SHP, SHP, and SHP), and 3-levels microwave with puffing (MWP, MWP, and MWP). These methods were applied to GCBs pre-soaked in water for different times. The effects of these treatments on color change, porosity, microstructure, citric acid sorption capacity, and caffeine and chlorogenic acid extraction yield were investigated.

View Article and Find Full Text PDF

In this study, probiotics with superior fermentation performance were screened, and the mixed-bacteria fermentation was carried out with Auricularia auricula treated with microwave-puffed process as fermentation substrate, and the changes in nutritional quality under different storage conditions were investigated. The results showed that the acid and bile salt resistance of Lactiplantibacillus plantarum 21,801 and 21,805 reached 95 % and 75 % respectively, and the intestinal adhesion was superior; microwave puffing treatment had the highest retention rate of A. auricula polysaccharides and the lowest loss of polyphenols, and no effect on soluble protein.

View Article and Find Full Text PDF

To enhance the drying quality of potato slices, this investigation employed a microwave heating (MH) combined with ethanol osmotic dehydration (EOD) pretreatment strategy to improve the quality of explosion puffing drying (EPD). This paper systematically investigated the effects of different pretreatment methods (no treatment, HAD, MH, EOD, MH+EOD) on the quality and physicochemical properties of potato slices subjected to CO-EPD. The results showed that after MH and EOD pretreatments, the internal pores of the potato slices exhibited a uniform porous structure.

View Article and Find Full Text PDF

A Strategy for Anode Recovery and Upgrading by In Situ Growth of Iron-Based Oxides on Microwave-Puffed Graphite.

Molecules

July 2024

National Engineering Laboratory for Reducing Emissions from Coal Combustion, Engineering Research Center of Environmental Thermal Technology of Ministry of Education, Shandong Key Laboratory of Energy Carbon Reduction and Resource Utilization, School of Energy and Power Engineering, Shandong University, Jinan 250061, China.

Faced with the increasing volume of retired lithium-ion batteries (LIBs), recycling and reusing the spent graphite (SG) is of great significance for resource sustainability. Here, a facile method for transforming the SG into a carbon framework as well as loading FeO to form a composite anode with a sandwich structure is proposed. Taking advantage of the fact that the layer spacing of the spent graphite naturally expands, impurities and intercalants are eliminated through microwave thermal shock to produce microwave-puffed graphite (MPG) with a distinct three-dimensional structure.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!