Zeolitic Imidazolate Frameworks as Latent Thermal Initiators in the Curing of Epoxy Resin.

The curing of a mixture of glycidyl phenyl ether (GPE) and hexahydro-4-methylphthalic anhydride (MHHPA) with zeolitic imidazolate frameworks (ZIFs)-ZIF-7, ZIF-8, ZIF-11, and ZIF-14-as latent thermal initiators has been critically evaluated. For ZIF-8 and ZIF-14, the % conversion values for GPE were 92 and 93%, respectively, for curing at 100 °C and for 1 h. With regard to the stability of ZIF-8 and ZIF-14 in the GPE-MHHPA mixture, the % conversion values for GPE were 11 and 12% for storage over 8 days at 25 °C. The ZIF-8 and ZIF-14 initiators exhibited excellent thermal latency for heating at 100 °C and showed good stability for storage at 25 °C. To evaluate the practicality of the resin curing system, the reactions of 2,2-bis(4-glycidyloxyphenyl)propane (DGEBA) and MHHPA with ZIFs were studied by differential scanning calorimetry. Prominent exothermic peaks for ZIF-8 and ZIF-14 were observed at 157 and 162 °C, respectively; by comparison, for the commercially available microencapsulated latent thermal initiators HX-3088 and HX-3722, the respective peak maxima were 177 and 181 °C, respectively. The exothermic peak maxima for ZIF-8 and ZIF-14 were lower than those for HX-3088 and HX-3722. The ZIF-8 and ZIF-14 initiators can be stored in precured epoxy resin at 25 °C and cured by lower temperatures compared with commercially-available initiators HX-3088 and HX-3722.