Co-pyrolysis of biomass and waste tires under high-pressure two-stage fixed bed reactor.

Bioresour Technol

School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China.

Published: January 2022

The distribution of biomass pyrolysis products under high pressure have rarely been reported. In this study, the effect of pressure on the product distribution of pine sawdust (PS) pyrolysis was studied. The synergistic effect of the side wall rubber (SWR) and PS was confirmed under pressurized conditions. Calcined bottom ash (CBA) and SWR char (SWRC) were used to enhance the quality of the pressurized co-pyrolysis products. The PS and SWR pyrolysis chars obtained under high pressure conditions exhibited serious melting and cross-linking problem. The CO content decreased to 19.96 vol% in co-pyrolysis gas with the CBA/SWRC catalyst. The water content decreased by 85.71% after the SWRC catalyst in the pressurized co-pyrolysis process. Compared with the concentration of benzene in PS and SWR oil, the concentration of benzene in SWR/PS oil without catalysts increased by 9.57 times and 0.25 times, respectively.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.biortech.2021.126306DOI Listing

Publication Analysis

Top Keywords

high pressure
8
pressurized co-pyrolysis
8
content decreased
8
concentration benzene
8
co-pyrolysis
4
co-pyrolysis biomass
4
biomass waste
4
waste tires
4
tires high-pressure
4
high-pressure two-stage
4

Similar Publications

High-Performance Mechano-Sensitive Piezoelectric Nanogenerator from Post-Treated Nylon-11,11 Textiles for Energy Harvesting and Human Motion Monitoring.

ACS Appl Mater Interfaces

January 2025

School of Materials Science and Engineering, Henan Key Laboratory of Advanced Nylon Materials and Application, Zhengzhou University, Zhengzhou 450001, China.

Piezoelectric polymer textiles offer distinct advantages in the fabrication of wearable nanogenerators (NGs). One effective strategy to enhance the output capacity of NGs is to modulate the piezoelectric performance of the textiles. This paper focuses on further improving the piezoelectric properties of nylon-11,11 textiles through post-drawing and annealing treatments.

View Article and Find Full Text PDF

Measurement and Assessment of Head-to-Helmet Contact Forces.

Ann Biomed Eng

January 2025

Department of Mechanical and Industrial Engineering, Northeastern University, 360 Huntington Avenue, Boston, MA, 02115, USA.

Purpose: To evaluate the population variation in head-to-helmet contact forces in helmet users.

Methods: Four different size Kevlar composite helmets were instrumented with contact pressure sensors and chinstrap tension meters. A total number of 89 volunteers (25 female and 64 male volunteers) participated in the study.

View Article and Find Full Text PDF

Purpose: To evaluate the effect of osilodrostat and hypercortisolism control on blood pressure (BP) and glycemic control in patients with Cushing's disease.

Methods: Pooled analysis of two Phase III osilodrostat studies (LINC 3 and LINC 4), both comprising a 48-week core phase and an optional open-label extension. Changes from baseline in systolic and diastolic BP (SBP and DBP), fasting plasma glucose (FPG), and glycated hemoglobin (HbA) were evaluated during osilodrostat treatment in patients with/without hypertension or diabetes at baseline.

View Article and Find Full Text PDF

Phase transitions in the mantle control its internal dynamics and structure. The post-spinel transition marks the upper-lower mantle boundary, where ringwoodite dissociates into bridgmanite plus ferropericlase, and its Clapeyron slope regulates mantle flow across it. This interaction has previously been assumed to have no lateral spatial variations, based on the assumption of a linear post-spinel boundary in pressure and temperature.

View Article and Find Full Text PDF

High-temperature structural disorders stabilize hydrous aluminosilicates in the mantle transition zone.

Nat Commun

January 2025

Center for High Pressure Science, State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, 066004, China.

Hydrous aluminosilicates are important deep water-carriers in sediments subducting into the deep mantle. To date, it remains enigmatic how hydrous aluminosilicates withstand extremely high temperatures in the mantle transition zone. Here we systematically investigate the crystal structures and chemical compositions of typical hydrous aluminosilicates using single-crystal X-ray diffraction, electron probe microanalyzer, and nanoscale secondary ion mass spectrometry.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!