AI Article Synopsis
Article Abstract
In the industries of petroleum extraction, a large volume of oily sludge is being generated. This waste is usually considered difficult to dispose of, causing environmental and economic issues. This study presented the novel experimental method of manufacturing mortar used in civil construction by cement and oily sludge ash (OSA). The defined method was described with a logical experimental study conducted to examine a feasible manufacturing method for casting cement-based mortars by partially replacing cement with OSA. Replacement concentrations for OSA ranged from 0 to 20 percent by cement weight, while the water-to-cement (w/c) ratio was varied from 0.4 to 0.8, and the amount of sand was kept constant. The strengths and absorption rate of the mortar were monitored for 28 days. The OSA contains a crystalline structure with packs of angular grains. Because of OSA in the cement-based mortar mixtures and water-to-cement ratios, the mechanical strength was improved significantly. However, the water absorption trend increased linearly. Using variance analysis, the influence of OSA and w/c ratio on the behavior of mortar was acquired. The developed models were significant for all -value reactions of <5%. Numerical optimization results showed that the best mixture can be obtained by replacing 8.19 percent cement with OSA and 0.52 as a ratio of w/c.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8585450 | PMC |
| http://dx.doi.org/10.3390/ma14216308 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Impact of olive mill wastewater on the operational efficiency of wastewater treatment plants in the Gaza Strip.
Environ Monit Assess
December 2024
Department of Environmental Engineering, Gebze Technical University, Kocaeli, 41400, Turkey.
The improper disposal of olive mill wastewater (OMW) presents a significant environmental challenge for wastewater treatment plants (WWTPs) in the Gaza Strip. This study aims to evaluate the impact of OMW discharge on the operational efficiency of WWTPs, particularly during the olive harvesting season. To achieve this, samples were collected from both olive mills and WWTPs across the region and analyzed for key parameters such as chemical oxygen demand (COD), biological oxygen demand (BOD), phenols, oil and grease, and total suspended solids (TSS).
View Article and Find Full Text PDFInsight into the Thermal Washing Mechanism of Sodium Lignosulfonate Alkyl/Sodium Persulfate Compound on Oily Sludge.
Int J Mol Sci
November 2024
Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, China.
Article Synopsis
- The study investigates the effectiveness of using sodium persulfate (SD) and sodium lignosulfonate surfactant in thermally washing oily sludge to improve remediation methods.
- It evaluates the impact of various reaction conditions on the breakdown of different hydrocarbon types (saturated, aromatic, resins, and asphaltenes) in oily sludge.
- Results showed that while SD effectively degrades these hydrocarbons, sodium hydroxide acts as a catalyst, and lignosulfonate aids in the removal process by lowering the solution's surface tension.
Enhancement of dewatering performance and effective degradation of petroleum hydrocarbons in biological oily sludge using atmospheric pressure plasma jet.
Bioresour Technol
December 2024
Department of Environmental Engineering, College of Ecology and Environment, Nanjing Forestry University, Nanjing 210037, China. Electronic address:
The presence of petroleum hydrocarbon components (PHCs) in biological oily sludge increases the toxicity of the sludge and makes dewatering even more difficult. In this study, an atmospheric pressure plasma jet (APPJ) technology was used for treating biological oily sludge. The results showed that under specific conditions-a sludge/water ratio of 1:100, a discharge power of 440 W, and a 60-min treatment-the degradation rate of PHCs reached 36.
View Article and Find Full Text PDFDeep dewatering of oily sludge: Mechanism, characterization, and pretreatment technology.
Environ Res
November 2024
School of Environmental Science and Engineering, Tianjin University, Tianjin, 300350, China. Electronic address:
Article Synopsis
- - Oily sludge presents major treatment challenges due to high organic pollution, bound water content, and viscosity from petroleum hydrocarbons, leading to difficulties in disposal and management.
- - The study explores deep dewatering methods focusing on removing internal bound water and altering physicochemical properties, which are essential for effective water liberation and sludge treatment.
- - Key findings highlight the importance of floc formation and dewatering channels, along with promising advancements in using electric fields and new technologies like advanced oxidation and demulsification for improved sludge dewatering processes.
Perspectives on innovative non-fertilizer applications of sewage sludge for mitigating environmental and health hazards.
Commun Eng
November 2024
Arizona State University, 660 S. College Avenue, Tempe, AZ, 85287, USA.
As waste production increases and resources become limited, sewage sludge presents a valuable resource with potential beyond traditional land use and incineration. This review emphasizes exploring innovative non-fertilizer applications of sewage sludges and advocates for viewing wastewater treatment plants as sources of valuable feedstock and carbon sequestration. Innovative uses include integrating sewage sludge into construction materials such as asphalt pavements, geopolymer, cementitious composites, and masonry blocks.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!