Rechargeable lithium-ion batteries (LIBs) have a wide range of applications but face challenges in harsh working or operating environments at high temperatures. In this work, a solid polymer electrolyte with MWCNT-COOH as an additive (MWCNT-SPE) was obtained. MWCNT-SPE has a high thermal stability and can be used in high-temperature operating environments. Solid-state lithium batteries based on MWCNT-SPE and LiFePO were assembled. The resulting lithium batteries exhibited excellent electrochemical properties at 70 and 120 °C, demonstrating a wide range of operations suitable for solid-state batteries with extreme demands. The symmetrical Li/MWCNT-SPE/Li cell operated for 1800 h with low polarization voltage and no short circuit, and the LiFePO/MWCNT-SPE/Li cell delivered superior cycling performance under both 0.2 and 0.5 C-rates, indicating that the interface compatibility between the lithium metal and MWCNT-SPE membrane was good and could effectively suppress the formation of lithium dendrites. The superior performance of the resulting MWCNT-SPE was due to the weak interaction between PEO, PVDF-HFP, and MWCNT-COOH, which reduced the tendency of PEO's crystallinity and thereby significantly increased the Li migration ability and improved the cycling life of the batteries.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8567355 | PMC |
| http://dx.doi.org/10.1021/acsomega.1c04275 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
High-Rate 4.2 V Solid-State Potassium Batteries by In Situ Polymerized Epoxide Ether Electrolyte.
Nano Lett
January 2025
College of Materials Science and Engineering, Hunan Joint International Laboratory of Advanced Materials and Technology of Clean Energy, Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology, Hunan University, Changsha 410082, China.
Article Synopsis
- Solid-state metallic potassium batteries (SSMPBs) are gaining attention as alternatives to lithium batteries, but face challenges like low ionic conductivity and high interfacial resistance.
- Researchers achieved improved performance by using in situ ring-opening polymerization with a plasticizer and catalyst, resulting in short-chain polyether electrolytes that significantly enhance ionic conductivity.
- The developed SSMPBs show a high discharge capacity of 69 mAh/g at 100 mA/g and 88.8% capacity retention after 100 cycles, outperforming previous SSMPB studies.
Enhancing cathode composites with conductive alignment synergy for solid-state batteries.
Sci Adv
January 2025
Department of Mechanical Engineering, University of Delaware, Newark, DE 19716, USA.
Article Synopsis
- Enhancing transport and mechanical properties in cathode composites is essential for solid-state battery performance.
- The FAST electrode features vertically aligned carbon nanotubes in a polymer electrolyte, improving ionic and electronic conductivity while reinforcing the electrode.
- This innovative design leads to excellent electrochemical performance, achieving a capacity of 148.2 mAh/g at 0.2 C over 100 cycles, indicating progress in solid-state lithium metal battery technology.
Block Copolymer Electrolytes with Double Primitive Cubic Structures: Enhancing Solid-State Lithium Conduction via Lithium Salt Localization.
ACS Nano
January 2025
Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang 37673, Republic of Korea.
We present a strategy for enhancing Li conduction in block copolymer electrolytes by introducing trace amounts of Li salts into polystyrene--poly(ethylene oxide) (PS--PEO), wherein Li ions preferentially coordinate with the -OH end groups of the PEO chains, resulting in the formation of double primitive cubic (3̅) structures. Compared with TFSI anions in Li salts, smaller anions (PF and BF) could facilitate ion localization more effectively, expanding the salt concentration range for developing stable 3̅ structures. The 3̅ structures formed in PS--PEOs doped with LiBF at = 0.
View Article and Find Full Text PDFElectro-chemo-mechanics of anode-free solid-state batteries.
Nat Mater
January 2025
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, USA.
Anode-free solid-state batteries contain no active material at the negative electrode in the as-manufactured state, yielding high energy densities for use in long-range electric vehicles. The mechanisms governing charge-discharge cycling of anode-free batteries are largely controlled by electro-chemo-mechanical phenomena at solid-solid interfaces, and there are important mechanistic differences when compared with conventional lithium-excess batteries. This Perspective provides an overview of the factors governing lithium nucleation, growth, stripping and cycling in anode-free solid-state batteries, including mechanical deformation of lithium, the chemical and mechanical properties of the current collector, microstructural effects, and stripping dynamics.
View Article and Find Full Text PDFLiZrF protective layer enabled high-voltage LiCoO positive electrode in sulfide all-solid-state batteries.
Nat Commun
January 2025
Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, China.
The application of high-voltage positive electrode materials in sulfide all-solid-state lithium batteries is hindered by the limited oxidation potential of sulfide-based solid-state electrolytes (SSEs). Consequently, surface coating on positive electrode materials is widely applied to alleviate detrimental interfacial reactions. However, most coating layers also react with sulfide-based SSEs, generating electronic conductors and causing gradual interface degradation and capacity fading.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!