The qualitative and quantitative analysis of polycyclic aromatic hydrocarbons (PAHs) has been important for the environmental control of persistent organic pollutants for decades. Considering the potential risk of deterioration, degradation, and external pollution during transportation, the development of rapid and onsite detection of trace PAHs is in demand. Here, taking the advantage of high sensitivity of surface-enhanced Raman spectroscopy (SERS), we developed a shipboard instrument by combining a portable Raman instrument and a flow injection device, integrating the sample pretreatment and target detection step by step. The feasibility of the instrument was demonstrated by detecting trace benzo[a]pyrene from different water environments with the lowest detection concentration less than 1 µg/l. The reliable stability and repeatability indicate that in the case of emergency response, the developed flow injection analysis-SERS instrument is very promising for the quantitative and qualitative analysis of diverse organic pollutants other than PAHs in water environments.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1063/5.0043038 | DOI Listing |
Pharmaceutics
November 2024
College of Pharmacy and Research Institute for Drug Development, Pusan National University, 63 Busandaehak-ro, Geumjeong-gu, Busan 46241, Republic of Korea.
This study investigates the impact of supercritical antisolvent (SAS) process parameters on the particle formation of telmisartan, a poorly water-soluble drug. A fractional factorial design was employed to examine the influence of the SAS process parameters, including solvent ratio, drug solution concentration, temperature, pressure, injection rate of drug solution, and CO₂ flow rate, on particle formation. Solid-state characterizations of the SAS process particles using XRD and FT-IR confirmed their amorphous nature.
View Article and Find Full Text PDFPolymers (Basel)
December 2024
Department of Mechanical Engineering, Federal University of Campina Grande, Campina Grande 58429-900, PB, Brazil.
Recently, the liquid composite molding technique (LCM) has been used for producing fiber-reinforced polymer composites, since it allows the molding of complex parts, presenting good surface finishing and control of the mechanical properties of the product at the end of the process. Studies in this area have been focused on resin transfer molding (RTM), specifically on the resin rectilinear infiltration through the porous preform inserted in the closed cavity neglecting the sorption effect of the polymeric fluid by the reinforcement. Thus, the objective of this work is to predict resin radial flow in porous media (fibrous preform), including the effect of resin sorption by fibers considering a one-dimensional approach.
View Article and Find Full Text PDFPolymers (Basel)
December 2024
Department of Petroleum and Energy Engineering, School of Science and Engineering, The American University in Cairo, New Cairo 11835, Egypt.
One of the most challenging aspects of manipulating the flow of fluids in subsurfaces is to control their flow direction and flow behavior. This can be especially challenging for compressible fluids, such as CO, and for multiphase flow, including both water and carbon dioxide (CO). This research studies the ability of two crosslinked polymers, including hydrolyzed polyacrylamide and acrylic acid/hydrolyzed polyacrylamide crosslinked polymers, to reduce the permeability of both CO and formation water using different salinities and permeability values and in the presence of crude oil under different injection rates.
View Article and Find Full Text PDFPolymers (Basel)
December 2024
Program of Pharmaceutical Engineering, Department of Industrial Pharmacy, Faculty of Pharmacy, Silpakorn University, Nakhon Pathom 73000, Thailand.
Cellulose acetate butyrate is a biodegradable cellulose ester bioplastic produced from plentiful natural plant-based resources. Solvent-exchange-induced in situ gels are particularly promising for periodontitis therapy, as this dosage form allows for the direct delivery of high concentrations of antimicrobial agents to the localized periodontal pocket. This study developed an in situ gel for periodontitis treatment, incorporating a combination of metronidazole and doxycycline hyclate, with cellulose acetate butyrate serving as the matrix-forming agent.
View Article and Find Full Text PDFPharmaceuticals (Basel)
December 2024
Key Laboratory of Xinjiang Endemic and Ethnic Diseases, Ministry of Education, Shihezi University School of Medicine, Shihezi 832003, China.
The Chansu injection (CSI), a sterile aqueous solution derived from Chansu, is applied in clinical settings to support antitumor and anti-radiation treatments. CSI's principal active components, bufadienolides (≥90%), demonstrate potential effects on pancreatic cancer (PDAC), but their underlying mechanisms remain unclear. This study aimed to elucidate the antitumor effects and pathways associated with CSI in PDAC.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!