Total organic halogen in two drinking water supply systems: Occurrence, variations, and relationship with trihalomethanes.

The spatiotemporal presence of overall disinfection by-products (DBPs) in two full-scale drinking water supply systems (DWSSs) were investigated using quantification of total organic halogen (TOX). The relationships of TOX with water quality parameters (especially the most regulated DBPs, trihalomethanes (THMs)) were also evaluated. The TOX levels ranged between 2.6 and 70.3 μg Cl/L and between 46.6 and 205.9 μg Cl/L in raw water and distribution water, respectively. The TOX concentration in water increased by an average of nine times after water treatment and varied slightly during distribution, suggesting that TOX in drinking water was mainly formed during chlorination disinfection rather than distribution. No clear seasonality in TOX level was observed. Positive correlations were found between raw water dissolved organic carbon (DOC) with an increase in TOX in treated water and between DOC level with TOX content in distributed water, emphasizing a key role of organics in TOX formation. Chloroform (TCM) was the dominant THM, followed by bromodichloromethane (BDCM) in the drinking water, and the levels of the other two measured THMs (dibromochloromethane and bromoform) were negligible. THM2 (sum of TCM and BDCM) made up average of 18% of the TOX, and was weakly correlated with TOX content (r = 0.321; P < 0.05), implying that THM is not a suitable surrogate measure for TOX in drinking water. This study provides basic data on the occurrence and variation of TOX within conventional DWSSs and highlights the importance of using TOX measurements to obtain more accurate information about DBP occurrence, for exposure assessment and regulatory determination.