Incorporation of high fructose corn syrup with different fructose levels into biscuit: An assessment of physicochemical and textural properties.

This study examined the effects of different concentrations of high-fructose corn syrup (HFCS, 28%, 44%, 55%) used in biscuit formulation on the hydroxymethyl furfural (HMF) acrylamide content, and textural properties were investigated and compared with invert sugar and sucrose-incorporated samples. No significant difference in the chemical composition (moisture, fat, protein, and ash) among different samples was noted based on the results. The highest L* was associated with a control sample containing sugar and invert sugar, although an increase in F55 content decreased the L* value significantly ( < .05). The highest hardness value was correlated with control samples (6.5 N), although the sample with 12.5% F42 and 25% F55 demonstrated lower hardness 6.27 N, and the lowest hardness value (3.97 N) was related to the sample containing 12.5% F42 and 25% F28. The amounts of water activity of all samples were in the range of 0.22 to 0.29, with the highest amount related to the control sample. The images showed a uniform surface with several holes for all the biscuits. The highest and lowest (HMF) levels were related to the samples containing 25% F55 (46.04) and 12.5% F42 with 2.36 ppm. The control sample with the acrylamide amount of 28.50 ppb and the sample containing 12.5% F42 and 25% F55 with the acrylamide amount of 27.33 ppb showed the highest acrylamide content.