Flexural Behavior of T-Shaped UHPC Beams with Varying Longitudinal Reinforcement Ratios.

In order to investigate the transverse flexural behavior of the UHPC waffle deck, a total of six T-shaped UHPC beams, with varying longitudinal reinforcement ratios, were tested and analyzed. The experiments, including material tests of UHPC and beam tests, were conducted. The material tests of UHPC revealed that strain-hardening behavior in tension was exhibited, and the ratio of uniaxial compressive strength-to-cubic compressive strength was 0.85. The beam tests showed that all the T-shaped UHPC beams, even without longitudinal rebar, exhibited ductile behavior that was similar to that of properly reinforced concrete beams. As the longitudinal reinforcement ratio increased, more flexural cracks developed and a larger load-carrying capacity was provided. Furthermore, the sectional analysis for the ultimate flexural capacity of T-shaped UHPC beams was conducted. Simplified material models, under tension and compression, for UHPC were developed. Based on the reverse calculation from the experimental result, the relation between reduction factor to the ultimate tensile strength of UHPC, and longitudinal reinforcement ratios was formulated. As a result, the predictive equations for the ultimate flexural capacity of T-shaped UHPC beams were proposed, and agreed well with the experimental results in this study and existing studies, which indicates good validity of the proposed equations.