A fiber-optic probe consisting of a section of graded-index multimode fiber (GIMF) fused onto a few-mode fiber (FMF) is proposed in this paper. The orbital angular momentum (OAM) mode guided by the FMF was launched into the GIMF, and a focused OAM beam profile was obtained by tailoring the length of the GIMF. Based on the analysis of the propagation trajectory, the intensity distributions, and the phase distributions of the vortex beam in GIMF, the focusing properties of the OAM mode were investigated. It is found that there exists a maximum working distance at an optimal GIMF length, and a trade-off between the beam size and working distance should be taken into account for optical tweezer applications. These results are expected to be applied to optical fiber tweezers for more flexible and efficient optical manipulation of particles.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/AO.431057 | DOI Listing |
We simulate the optical properties of polymer optical waveguides with different refractive index profiles in their cores as coupling components (edge couplers) between single-mode fiber and SiOx waveguides. In this paper, we focus on the single-mode operation of graded-index (GI) core polymer waveguides, for which we previously demonstrated low propagation loss under multimode operation. We design the optimum core structure (size and index contrast) for different refractive index profiles, and then demonstrate the unique optical properties of GI waveguides contributing to the low optical loss compared to the step-index counterparts, in particular, mode field diameter variation and taper angle tolerance.
View Article and Find Full Text PDFWe experimentally study the spatial beam profile and the spectral broadening at the output of a multimode air-silica microstructure fiber taper, used along the direction of an increasing fiber diameter. By using a laser pump at 1064 nm emitting 60 ps Gaussian beam pulses, we observed a competition between Raman beam cleanup and Kerr beam self-cleaning: the multimode frequency conversion process permits to generate spectral sidebands with frequency detuning from the pump that are difficult to obtain in standard graded-index multimode fibers. The generated supercontinuum spans from 500 nm up to 2.
View Article and Find Full Text PDFMicromachines (Basel)
July 2024
Institute of Automation and Electrometry SB RAS, Novosibirsk 630090, Russia.
Multimode fibers are attractive for high-power lasers if transverse modes are efficiently controlled. Here, a dielectric thin-film mirror (R~20%) is micro-fabricated on the central area of the end face of a 1 km multimode 100/140 µm graded-index fiber and tested as the output mirror of a Raman laser with highly multimode (M~34) 940 nm diode pumping. In the cavity with highly reflective input FBG, Raman lasing of the Stokes wave at 976 nm starts at the threshold pump power of ~80 W.
View Article and Find Full Text PDFSci Rep
July 2024
Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR6303 CNRS-Université Bourgogne Franche-Comté, Dijon, 21000, France.
We present theoretical and experimental evidence of high-gain far-detuned nonlinear frequency conversion, extending towards both the visible and the mid-infrared, in a few-mode graded-index silica fiber pumped at 1.064 , and more specifically achieving gains of hundreds of dB per meter below 0.65 and beyond 3.
View Article and Find Full Text PDFWe present a direct experimental confirmation of the maximization of entropy which accompanies the thermalization of a highly multimode light beam, upon its nonlinear propagation in standard graded-index (GRIN) optical fibers.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!